Collendina flood map & planning overlays
A planning-constraint profile of Collendina (Federation, NSW) - 176.15 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
176.15 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Collendina's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Collendina at a glance
How Collendina is zoned
Buying in Collendina? The zoning, flood and bushfire lines on the section 10.7 certificate attached to the contract are mapped controls - see our s10.7 certificate guide.
Across its 176.15 km², Collendina is highly constrained by planning overlays. About 12% of the suburb sits within a mapped flood overlay, and 15% is flagged bushfire-prone. There are 2 heritage-listed sites on record, and the dominant land-use zone is Primary Production. The median lot measures about 499,729 m² across 215 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Collendina address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Collendina planning - frequently asked
Where can I see a flood map of Collendina?
The schematic on this page is a Collendina flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 12% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Collendina address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Collendina flood-prone?
About 12% of Collendina falls within a mapped flood overlay, against a Federation average of 4%. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Collendina bushfire-prone?
Yes - around 15% of Collendina is mapped as bushfire-prone, compared with a Federation average of 15%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Collendina?
The dominant planning zone in Collendina is Primary Production, though the suburb also includes Environmental Management and National Parks and Nature Reserves. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Collendina have heritage-listed places?
Collendina has 2 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
What is the typical lot size in Collendina?
Across 215 surveyed parcels in Collendina, the median lot size is about 499,729 m². There are also 2 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Does Collendina have a train station?
There is no train station inside Collendina itself. The suburb is served by 2 bus stops.
Do I need a planning report for a Collendina property?
A Collendina planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.