Baree flood map & planning overlays

A planning-constraint profile of Baree (Rockhampton Regional, QLD) - 1.45 km², mapped from live council and state overlay data. This suburb is highly constrained.

Elevation hillshade with street names, clipped to Baree's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.

Baree flood risk at the property level

Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 179 Baree properties.

Baree at a glance

Parcels 192 Median lot 2,020 m² Mapped easements 2

How Baree is zoned

Rural 57%
Rural residential 38%
Community facilities 4%
Unzoned 1%

Selling in Baree? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.

Across its 1.45 km², Baree is highly constrained by planning overlays. About 33% of the suburb sits within a mapped flood overlay, and 39% is flagged bushfire-prone. There are 2 heritage-listed sites on record, and the dominant land-use zone is Rural. The terrain is hilly, and the median lot measures about 2,020 m² across 192 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.

Check a specific Baree address

See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.

See what's in the $9 report →

Baree planning - frequently asked

Where can I see a flood map of Baree?

The schematic on this page is a Baree flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 33% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Baree address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.

Is Baree flood-prone?

About 33% of Baree falls within a mapped flood overlay, against a Rockhampton Regional average of 49%. Looking lot by lot, 0% of the 179 properties we analysed in Baree carry some level of mapped flood risk. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.

Is Baree bushfire-prone?

Yes - around 39% of Baree is mapped as bushfire-prone, compared with a Rockhampton Regional average of 36%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.

What is the zoning in Baree?

The dominant planning zone in Baree is Rural, though the suburb also includes Rural residential and Community facilities. Zoning sets what you can build and do on a site, and can differ lot by lot.

Does Baree have heritage-listed places?

Baree has 2 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.

Is Baree hilly or flat?

Baree is hilly: the median lot slope is about 12%, and 28% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 236 m to 289 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.

What is the typical lot size in Baree?

Across 192 surveyed parcels in Baree, the median lot size is about 2,020 m². There are also 2 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.

Do I need a planning report for a Baree property?

A Baree planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.

Other suburbs in Rockhampton Regional

See all Rockhampton Regional suburb profiles →