Cape Hillsborough flood map & planning overlays
A planning-constraint profile of Cape Hillsborough (Mackay Regional, QLD) - 11.64 km², mapped from live council and state overlay data. This suburb is highly constrained.
Constraint readout
11.64 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Cape Hillsborough's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Cape Hillsborough flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 25 Cape Hillsborough properties.
Lot-level readout
Flood-risk rating across all 25 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Cape Hillsborough.
Cape Hillsborough at a glance
How Cape Hillsborough is zoned
Selling in Cape Hillsborough? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 11.64 km², Cape Hillsborough is highly constrained by planning overlays. About 28% of the suburb sits within a mapped flood overlay, and 56% is flagged bushfire-prone. The dominant land-use zone is Conservation. The terrain is gently undulating, and the median lot measures about 53,663 m² across 33 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Cape Hillsborough address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Cape Hillsborough planning - frequently asked
Where can I see a flood map of Cape Hillsborough?
The schematic on this page is a Cape Hillsborough flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 28% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Cape Hillsborough address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Cape Hillsborough flood-prone?
About 28% of Cape Hillsborough falls within a mapped flood overlay, against a Mackay Regional average of 54%. Looking lot by lot, 40% of the 25 properties we analysed in Cape Hillsborough carry some level of mapped flood risk, including 10 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Cape Hillsborough bushfire-prone?
Yes - around 56% of Cape Hillsborough is mapped as bushfire-prone, compared with a Mackay Regional average of 26%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Cape Hillsborough?
The dominant planning zone in Cape Hillsborough is Conservation, though the suburb also includes Open space and Rural. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Cape Hillsborough have heritage-listed places?
No heritage-listed places are on record within Cape Hillsborough. Even so, it is worth confirming for an individual property before any works.
Is Cape Hillsborough hilly or flat?
Cape Hillsborough is gently undulating: the median lot slope is about 4%, and 16% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 6 m to 50 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Cape Hillsborough?
Across 33 surveyed parcels in Cape Hillsborough, the median lot size is about 53,663 m².
Do I need a planning report for a Cape Hillsborough property?
A Cape Hillsborough planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.