Foulden flood map & planning overlays
A planning-constraint profile of Foulden (Mackay Regional, QLD) - 3.2 km², mapped from live council and state overlay data. This suburb is highly constrained.
Constraint readout
3.2 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Foulden's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Foulden flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 47 Foulden properties.
Lot-level readout
Flood-risk rating across all 47 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Foulden.
Foulden at a glance
How Foulden is zoned
Selling in Foulden? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 3.2 km², Foulden is highly constrained by planning overlays. About 100% of the suburb sits within a mapped flood overlay. The dominant land-use zone is Rural. The terrain is largely flat, and the median lot measures about 5,572 m² across 49 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Foulden address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Foulden planning - frequently asked
Where can I see a flood map of Foulden?
The schematic on this page is a Foulden flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 100% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Foulden address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Foulden flood-prone?
About 100% of Foulden falls within a mapped flood overlay, against a Mackay Regional average of 54%. Looking lot by lot, 100% of the 47 properties we analysed in Foulden carry some level of mapped flood risk. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Foulden bushfire-prone?
Little to none of Foulden is mapped as bushfire-prone (the Mackay Regional average is 26%). Always confirm for the exact lot, as mapping can change.
What is the zoning in Foulden?
The dominant planning zone in Foulden is Rural, though the suburb also includes Special purpose and Open space. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Foulden have heritage-listed places?
No heritage-listed places are on record within Foulden. Even so, it is worth confirming for an individual property before any works.
Is Foulden hilly or flat?
Foulden is largely flat: the median lot slope is about 2%. Ground level runs from roughly 3 m to 11 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Foulden?
Across 49 surveyed parcels in Foulden, the median lot size is about 5,572 m². There are also 10 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Do I need a planning report for a Foulden property?
A Foulden planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.