Frazerview flood map & planning overlays
A planning-constraint profile of Frazerview (Scenic Rim Regional, QLD) - 46.11 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
46.11 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Frazerview's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Frazerview flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 65 Frazerview properties.
Lot-level readout
Flood-risk rating across all 65 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Frazerview.
Frazerview at a glance
How Frazerview is zoned
Selling in Frazerview? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 46.11 km², Frazerview is highly constrained by planning overlays. About 10% of the suburb sits within a mapped flood overlay, and 69% is flagged bushfire-prone. The dominant land-use zone is Rural. The terrain is gently undulating, and the median lot measures about 610,561 m² across 72 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Who lives in Frazerview
Census 2021 figures published by the ABS for the Frazerview suburb boundary itself, not a wider region.
Socio-economic standing
ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.
Score 1012, and decile 8 within Queensland. The national average is 1000.
Population trend, 2001 to 2025
Estimated resident population of Boonah, the wider ABS statistical area containing Frazerview. There is no annual population series published at suburb level, so this describes the surrounding area rather than Frazerview itself.
9,556 in 2001 to 13,450 in 2025, up 41%.
Source: Australian Bureau of Statistics. Census of Population and Housing 2021 (General Community Profile) and SEIFA 2021, both published at the Suburbs and Localities level; Regional Population (estimated resident population) at Statistical Area Level 2. Used under CC BY 4.0. Census counts of small populations are randomly adjusted by the ABS to protect confidentiality, so figures for small suburbs are indicative.
Check a specific Frazerview address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Frazerview planning - frequently asked
Where can I see a flood map of Frazerview?
The schematic on this page is a Frazerview flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 10% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Frazerview address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Frazerview flood-prone?
About 10% of Frazerview falls within a mapped flood overlay, against a Scenic Rim Regional average of 19%. Looking lot by lot, 35% of the 65 properties we analysed in Frazerview carry some level of mapped flood risk, including 23 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Frazerview bushfire-prone?
Yes - around 69% of Frazerview is mapped as bushfire-prone, compared with a Scenic Rim Regional average of 52%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Frazerview?
The dominant planning zone in Frazerview is Rural, though the suburb also includes Recreation and Open Space. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Frazerview have heritage-listed places?
No heritage-listed places are on record within Frazerview. Even so, it is worth confirming for an individual property before any works.
Is Frazerview hilly or flat?
Frazerview is gently undulating: the median lot slope is about 8%, and 20% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 85 m to 297 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Frazerview?
Across 72 surveyed parcels in Frazerview, the median lot size is about 610,561 m². There are also 2 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Is Frazerview an advantaged suburb?
On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Frazerview scores 1012 and sits in decile 7 of 10 nationally and decile 8 within Queensland - decile 1 being the most disadvantaged tenth of Australian suburbs and decile 10 the least. The national average score is 1000. SEIFA summarises income, education, occupation and housing across the whole suburb, so it describes the area, not any particular household in it.
Do I need a planning report for a Frazerview property?
A Frazerview planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.