Lansdowne zoning & planning overlays

A planning-constraint profile of Lansdowne (Blackall Tambo Regional, QLD) - 914.8 km², mapped from live council and state overlay data. This suburb is moderately constrained on the overlays we could measure - no flood mapping covers this suburb, so this is not a suburb-wide verdict.
Profile updated 12 September 2026.

Elevation hillshade with street names, clipped to Lansdowne's boundary, with the bushfire and environmental overlays drawn on top. No flood layer is drawn because we hold no flood mapping for this area.

Nearby suburbs, nearest first

Lansdowne at a glance

Parcels 32 Median lot 21,954,839 m² Schools in suburb 0

Schools in and near Lansdowne

Public school-location data shows availability across the suburb. These figures do not rate schools and do not assign a particular address to a catchment.

Inside the suburb boundary

0

0 schools providing primary years and 0 providing secondary years. A combined school may be counted in both teaching levels.

Nearest school availability

Primary: 12.16 km from the suburb boundary

Secondary: 12.16 km from the suburb boundary

Source: Queensland Government school geographic information. Catchment boundaries can divide a suburb and change over time; use the official catchment finder for a specific address.

How Lansdowne is zoned

Rural 100%

Selling in Lansdowne? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.

Across its 914.8 km², Lansdowne is moderately constrained by the planning overlays we hold. We hold no flood mapping covering this suburb, so no flood figure is shown - that is a gap in our data, not an all-clear. Of what is mapped, 12% is flagged bushfire-prone. The dominant land-use zone is Rural. The median lot measures about 21,954,839 m² across 32 parcels.

Who lives in Lansdowne

Census 2021 figures published by the ABS for the Lansdowne suburb boundary itself, not a wider region.

Population
36
usual residents, 2021

Socio-economic standing

ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.

Advantage and disadvantage (IRSAD) Decile 7
most disadvantagedleast disadvantaged

Score 1020, and decile 8 within Queensland. The national average is 1000.

Relative disadvantage (IRSD) Decile 9
most disadvantagedleast disadvantaged

Population trend, 2001 to 2025

Estimated resident population of Barcaldine - Blackall, the wider ABS statistical area containing Lansdowne. There is no annual population series published at suburb level, so this describes the surrounding area rather than Lansdowne itself.

5,868 in 2001 to 4,912 in 2025, down 16%.

Source: ABS Census 2021 and SEIFA 2021 (Suburbs and Localities), Regional Population (SA2), CC BY 4.0. Small counts are randomly adjusted by the ABS.

Lansdowne data sources and coverage

“Not mapped” means we hold no source layer for this suburb - never an all-clear.

DatasetCoveragePublisher
Flood mappingNot mappedthe relevant council planning scheme and Queensland Government spatial data
Bushfire-prone mappingMappedthe relevant council planning scheme and Queensland Government spatial data
ZoningMappedthe relevant council planning scheme and Queensland Government spatial data
Heritage and environmentMapped where publishedthe relevant council planning scheme and Queensland Government spatial data
Aircraft noise contours (ANEF)Not heldthe relevant council planning scheme and Queensland Government spatial data, Defence
DemographicsAvailableAustralian Bureau of Statistics (2021 Census and SEIFA)
School availabilityAvailableQueensland Government

Profile last materially updated 12 September 2026. See the methodology and full source list. Source data changes over time and critical decisions should be checked with the responsible authority.

Check a specific Lansdowne address

See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.

Building or pricing a slab? The $119 geotechnical desktop report covers geology, soils, bores and an indicative AS 2870 site class for a Lansdowne lot.

See what's in the $9 report →

Lansdowne planning - frequently asked

Is Lansdowne flood-prone?

We don't yet hold flood mapping covering Lansdowne, so this page can't say how much of the suburb is flood-affected - that is a gap in our data, not an indication that the suburb is free of flood risk. Blackall Tambo Regional is the authority to check for flood mapping in this area.

Is Lansdowne bushfire-prone?

Around 12% of Lansdowne is mapped as bushfire-prone, compared with a Blackall Tambo Regional average of 22%.

What is the zoning in Lansdowne?

The dominant planning zone in Lansdowne is Rural.

Does Lansdowne have heritage-listed places?

No heritage-listed places are on record within Lansdowne.

What is the typical lot size in Lansdowne?

Across 32 surveyed parcels in Lansdowne, the median lot size is about 21,954,839 m².

Is Lansdowne an advantaged suburb?

On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Lansdowne scores 1020 and sits in decile 7 of 10 nationally and decile 8 within Queensland (decile 1 is the most disadvantaged tenth, decile 10 the least).

Compare nearby suburbs

Nearby suburbDistanceFlood mappedBushfire-prone
Tambo 30.3 km 1% 9%
Bayrick 30.7 km Not mapped 14%
Macfarlane 31.3 km Not mapped 2%
Minnie Downs 34.7 km Not mapped 2%
Yandarlo 34.9 km Not mapped 16%
Nive
Murweh Shire
48.2 km Not mapped 11%
Lumeah 51.2 km Not mapped 12%
Mount Enniskillen 52.5 km Not mapped 18%
Scrubby Creek 64.8 km Not mapped 16%
Windeyer 68.8 km <1% 69%

See all Blackall Tambo Regional suburb profiles →