Mount Pelion flood map & planning overlays
A planning-constraint profile of Mount Pelion (Mackay Regional, QLD) - 61.1 km², mapped from live council and state overlay data. This suburb is highly constrained.
Constraint readout
61.1 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Mount Pelion's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Mount Pelion flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 107 Mount Pelion properties.
Lot-level readout
Flood-risk rating across all 107 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Mount Pelion.
Mount Pelion at a glance
How Mount Pelion is zoned
Selling in Mount Pelion? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 61.1 km², Mount Pelion is highly constrained by planning overlays. About 18% of the suburb sits within a mapped flood overlay, and 37% is flagged bushfire-prone. The dominant land-use zone is Rural. The terrain is gently undulating, and the median lot measures about 169,768 m² across 136 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Mount Pelion address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Mount Pelion planning - frequently asked
Where can I see a flood map of Mount Pelion?
The schematic on this page is a Mount Pelion flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 18% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Mount Pelion address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Mount Pelion flood-prone?
About 18% of Mount Pelion falls within a mapped flood overlay, against a Mackay Regional average of 54%. Looking lot by lot, 36% of the 107 properties we analysed in Mount Pelion carry some level of mapped flood risk, including 39 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Mount Pelion bushfire-prone?
Yes - around 37% of Mount Pelion is mapped as bushfire-prone, compared with a Mackay Regional average of 26%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Mount Pelion?
The dominant planning zone in Mount Pelion is Rural, though the suburb also includes Open space and Special purpose. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Mount Pelion have heritage-listed places?
No heritage-listed places are on record within Mount Pelion. Even so, it is worth confirming for an individual property before any works.
Is Mount Pelion hilly or flat?
Mount Pelion is gently undulating: the median lot slope is about 4%, and 19% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 4 m to 173 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Mount Pelion?
Across 136 surveyed parcels in Mount Pelion, the median lot size is about 169,768 m². There are also 6 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Do I need a planning report for a Mount Pelion property?
A Mount Pelion planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.