Wilsons Plains flood map & planning overlays
A planning-constraint profile of Wilsons Plains
(Scenic Rim Regional, QLD) - 10.84 km², mapped from live council and
state overlay data. This suburb is highly constrained.
Profile updated 19 September 2026.
Suburb-wide figures; the free map shows which overlays touch your lot.
Constraint readout
10.84 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Wilsons Plains's boundary, with the flood, bushfire and environmental overlays drawn on top.
Nearby suburbs, nearest first
How common is mapped flood risk across Wilsons Plains properties?
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched in a suburb-wide analysis of 46 Wilsons Plains properties. No individual property result is identified on this page.
Lot-level readout
Flood-risk rating across all 46 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Wilsons Plains.
Wilsons Plains flood history and overland flow
These are suburb-wide totals across 46 analysed properties. They show how common each mapped category is across Wilsons Plains; they do not identify or describe any individual property.
Recorded historical flood mapping
17 analysed properties intersect at least one mapped historical event extent.
- Defined Flood Event: 17
Source: Scenic Rim Regional Council flood mapping, aggregated by LayeredGeo. Categories are only shown where at least five analysed properties share them. An address-level check is still required to determine whether a particular lot is mapped.
Wilsons Plains at a glance
Schools in and near Wilsons Plains
Public school-location data shows availability across the suburb. These figures do not rate schools and do not assign a particular address to a catchment.
Inside the suburb boundary
0 schools providing primary years and 0 providing secondary years. A combined school may be counted in both teaching levels.
Nearest school availability
Primary: 1.15 km from the suburb boundary
Secondary: 15.66 km from the suburb boundary
Source: Queensland Government school geographic information. Catchment boundaries can divide a suburb and change over time; use the official catchment finder for a specific address.
How Wilsons Plains is zoned
Selling in Wilsons Plains? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 10.84 km², Wilsons Plains is highly constrained by planning overlays. About 28% of the suburb sits within a mapped flood overlay, and 10% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Rural. The terrain is largely flat, and the median lot measures about 277,922 m² across 47 parcels.
Who lives in Wilsons Plains
Census 2021 figures published by the ABS for the Wilsons Plains suburb boundary itself, not a wider region.
Socio-economic standing
ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.
Score 982, and decile 6 within Queensland. The national average is 1000.
Age profile
Share of Wilsons Plains's 62 residents in each ABS age band.
Population trend, 2001 to 2025
Estimated resident population of Boonah, the wider ABS statistical area containing Wilsons Plains. There is no annual population series published at suburb level, so this describes the surrounding area rather than Wilsons Plains itself.
9,556 in 2001 to 13,450 in 2025, up 41%.
Source: ABS Census 2021 and SEIFA 2021 (Suburbs and Localities), Regional Population (SA2), CC BY 4.0. Small counts are randomly adjusted by the ABS.
Wilsons Plains data sources and coverage
“Not mapped” means we hold no source layer for this suburb - never an all-clear.
| Dataset | Coverage | Publisher |
|---|---|---|
| Flood mapping | Mapped | the relevant council planning scheme and Queensland Government spatial data |
| Bushfire-prone mapping | Mapped | the relevant council planning scheme and Queensland Government spatial data |
| Zoning | Mapped | the relevant council planning scheme and Queensland Government spatial data |
| Heritage and environment | Mapped where published | the relevant council planning scheme and Queensland Government spatial data |
| Aircraft noise contours (ANEF) | Not held | the relevant council planning scheme and Queensland Government spatial data, Defence |
| Demographics | Available | Australian Bureau of Statistics (2021 Census and SEIFA) |
| School availability | Available | Queensland Government |
Profile last materially updated 19 September 2026. See the methodology and full source list. Source data changes over time and critical decisions should be checked with the responsible authority.
Check a specific Wilsons Plains address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
Published flood models are held over parts of Wilsons Plains. The free check tells you whether one reaches an address; where it does, a Flood Model Report is +$9 with the planning report.
The Terrain Report shows the fall of the block - contours, cross sections and a 3D model of the lot (+$9 with the planning report).
Building or pricing a slab? The $119 geotechnical desktop report covers geology, soils, bores and an indicative AS 2870 site class for a Wilsons Plains lot.
See what's in the $9 report →Wilsons Plains planning - frequently asked
Is Wilsons Plains flood-prone?
About 28% of Wilsons Plains falls within a mapped flood overlay, against the council-wide suburb average of 12%. Across the suburb, 35% of the 46 properties we analysed carry some level of mapped flood risk, including 16 rated high risk or historically affected.
Is Wilsons Plains bushfire-prone?
Around 10% of Wilsons Plains is mapped as bushfire-prone, compared with a Scenic Rim Regional average of 52%.
What is the zoning in Wilsons Plains?
The dominant planning zone in Wilsons Plains is Rural, though the suburb also includes Recreation and Open Space.
Does Wilsons Plains have heritage-listed places?
Wilsons Plains has 1 heritage-listed place on record.
Is Wilsons Plains hilly or flat?
Wilsons Plains is largely flat: the median ground slope is about 2%. Ground level runs from roughly 53 m to 94 m AHD across the suburb.
What is the typical lot size in Wilsons Plains?
Across 47 surveyed parcels in Wilsons Plains, the median lot size is about 277,922 m². There are also 9 registered easements mapped in the suburb.
What is the population of Wilsons Plains?
At the 2021 Census Wilsons Plains had 62 usual residents, with a median age of 44 and an average household size of 2.5 people. The wider Boonah statistical area, which contains Wilsons Plains, went from 9,556 people in 2001 to 13,450 in 2025, up 41%.
Is Wilsons Plains an advantaged suburb?
On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Wilsons Plains scores 982 and sits in decile 5 of 10 nationally and decile 6 within Queensland (decile 1 is the most disadvantaged tenth, decile 10 the least).
What is the median household income in Wilsons Plains?
Median household income in Wilsons Plains was $2,062 a week at the 2021 Census, against $1,562 for the typical suburb in Scenic Rim Regional. Median rent was $250 a week and the median mortgage repayment $1,465 a month.
Compare nearby suburbs
| Nearby suburb | Distance | Flood mapped | Bushfire-prone |
|---|---|---|---|
| Radford | 2.9 km | 69% | 20% |
| Milora | 3.2 km | <1% | 10% |
| Harrisville | 3.9 km | 26% | 21% |
| Munbilla | 4.5 km | 26% | 28% |
| Anthony | 5.2 km | 0% | 35% |
| Warrill View | 5.7 km | 31% | 28% |
| Limestone Ridges | 6.7 km | 0% | 33% |
| Blantyre | 6.9 km | 0% | 29% |
| Kents Lagoon | 6.9 km | 57% | 28% |
| Silverdale | 8.5 km | 20% | 32% |