Port Victoria flood map & planning overlays
A planning-constraint profile of Port Victoria (Yorke Peninsula Council, SA) - 56.76 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
56.76 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Port Victoria's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Port Victoria at a glance
How Port Victoria is zoned
Selling in Port Victoria? The zone and overlays on this page are the Planning and Design Code controls a Form 1 vendor's statement has to disclose - a $9 planning report pulls them at the lot level for any Port Victoria address.
Across its 56.76 km², Port Victoria is highly constrained by planning overlays. About 99% of the suburb sits within a mapped flood overlay, and 99% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Rural. The median lot measures about 1,010 m² across 758 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Port Victoria data sources and coverage
Every figure below is an aggregate for the suburb boundary. “Not mapped” means LayeredGeo does not hold a source layer covering this suburb; it is never an all-clear for a particular property.
| Dataset | Coverage | Publisher |
|---|---|---|
| Flood mapping | Mapped | the South Australian Planning and Design Code and Location SA spatial data |
| Bushfire-prone mapping | Mapped | the South Australian Planning and Design Code and Location SA spatial data |
| Zoning | Mapped | the South Australian Planning and Design Code and Location SA spatial data |
| Heritage and environment | Mapped where published | the South Australian Planning and Design Code and Location SA spatial data |
| Demographics | Not available | Australian Bureau of Statistics (2021 Census and SEIFA) |
Profile last materially updated 20 August 2026. See the methodology and full source list. Source data changes over time and critical decisions should be checked with the responsible authority.
Check a specific Port Victoria address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Port Victoria planning - frequently asked
Where can I see a flood map of Port Victoria?
The schematic on this page is a Port Victoria flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 99% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Port Victoria address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Port Victoria flood-prone?
About 99% of Port Victoria falls within a mapped flood overlay, against the council-wide suburb average of 93%. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Port Victoria bushfire-prone?
Yes - around 99% of Port Victoria is mapped as bushfire-prone, compared with a Yorke Peninsula Council average of 93%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Port Victoria?
The dominant planning zone in Port Victoria is Rural, though the suburb also includes Conservation and Rural Living. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Port Victoria have heritage-listed places?
Port Victoria has 1 heritage-listed place on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
What is the typical lot size in Port Victoria?
Across 758 surveyed parcels in Port Victoria, the median lot size is about 1,010 m².
Does Port Victoria have a train station?
There is no train station inside Port Victoria itself. The suburb is served by 1 bus stop.
Do I need a planning report for a Port Victoria property?
A Port Victoria planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.
Compare nearby suburbs
| Nearby suburb | Distance | Flood mapped | Bushfire-prone |
|---|---|---|---|
| Point Pearce | 9.0 km | 81% | 81% |
| Urania | 10.4 km | 100% | 100% |
| South Kilkerran | 10.8 km | 100% | 100% |
| Wauraltee | 11.9 km | 99% | 99% |
| Chinaman Wells | 14.5 km | 8% | 8% |
| Port Rickaby | 17.3 km | 89% | 89% |
| Yorke Valley | 18.0 km | 100% | 100% |
| Koolywurtie | 19.1 km | 100% | 100% |
| Balgowan | 21.6 km | 96% | 96% |
| Maitland | 22.9 km | 100% | 100% |