Alumy Creek flood map & planning overlays
A planning-constraint profile of Alumy Creek (Clarence Valley, NSW) - 8.99 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
8.99 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Alumy Creek's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Alumy Creek at a glance
How Alumy Creek is zoned
Buying in Alumy Creek? The zoning, flood and bushfire lines on the section 10.7 certificate attached to the contract are mapped controls - see our s10.7 certificate guide.
Across its 8.99 km², Alumy Creek is highly constrained by planning overlays. About 100% of the suburb sits within a mapped flood overlay, and 100% is flagged bushfire-prone. There are 5 heritage-listed sites on record, and the dominant land-use zone is Primary Production. The median lot measures about 60,000 m² across 73 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Alumy Creek address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Alumy Creek planning - frequently asked
Where can I see a flood map of Alumy Creek?
The schematic on this page is a Alumy Creek flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 100% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Alumy Creek address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Alumy Creek flood-prone?
About 100% of Alumy Creek falls within a mapped flood overlay, against a Clarence Valley average of 25%. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Alumy Creek bushfire-prone?
Yes - around 100% of Alumy Creek is mapped as bushfire-prone, compared with a Clarence Valley average of 94%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Alumy Creek?
The dominant planning zone in Alumy Creek is Primary Production, though the suburb also includes Recreational Waterways. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Alumy Creek have heritage-listed places?
Alumy Creek has 5 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
What is the typical lot size in Alumy Creek?
Across 73 surveyed parcels in Alumy Creek, the median lot size is about 60,000 m². There are also 1 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Does Alumy Creek have a train station?
There is no train station inside Alumy Creek itself. The suburb is served by 2 bus stops.
Do I need a planning report for a Alumy Creek property?
A Alumy Creek planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.