Junction Hill flood map & planning overlays
A planning-constraint profile of Junction Hill (Clarence Valley, NSW) - 7.4 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
7.4 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Junction Hill's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Junction Hill at a glance
How Junction Hill is zoned
Buying in Junction Hill? The zoning, flood and bushfire lines on the section 10.7 certificate attached to the contract are mapped controls - see our s10.7 certificate guide.
Across its 7.4 km², Junction Hill is highly constrained by planning overlays. About 64% of the suburb sits within a mapped flood overlay, and 67% is flagged bushfire-prone. There are 8 heritage-listed sites on record, and the dominant land-use zone is Primary Production. The median lot measures about 900 m² across 838 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Junction Hill address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Junction Hill planning - frequently asked
Where can I see a flood map of Junction Hill?
The schematic on this page is a Junction Hill flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 64% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Junction Hill address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Junction Hill flood-prone?
About 64% of Junction Hill falls within a mapped flood overlay, against a Clarence Valley average of 25%. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Junction Hill bushfire-prone?
Yes - around 67% of Junction Hill is mapped as bushfire-prone, compared with a Clarence Valley average of 94%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Junction Hill?
The dominant planning zone in Junction Hill is Primary Production, though the suburb also includes Low Density Residential and General Residential. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Junction Hill have heritage-listed places?
Junction Hill has 8 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
What is the typical lot size in Junction Hill?
Across 838 surveyed parcels in Junction Hill, the median lot size is about 900 m². There are also 7 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Does Junction Hill have a train station?
There is no train station inside Junction Hill itself. The suburb is served by 22 bus stops.
Do I need a planning report for a Junction Hill property?
A Junction Hill planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.