Anstead flood map & planning overlays
A planning-constraint profile of Anstead (Brisbane City, QLD) - 14.28 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
14.28 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Anstead's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Anstead flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 658 Anstead properties.
Lot-level readout
Flood-risk rating across all 658 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Anstead.
Anstead at a glance
How Anstead is zoned
Selling in Anstead? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 14.28 km², Anstead is highly constrained by planning overlays. About 30% of the suburb sits within a mapped flood overlay, and 81% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Conservation. The terrain is gently undulating, and the median lot measures about 10,076 m² across 611 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Who lives in Anstead
Census 2021 figures published by the ABS for the Anstead suburb boundary itself, not a wider region.
Socio-economic standing
ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.
Score 1120, and decile 10 within Queensland. The national average is 1000.
Age profile
Share of Anstead's 1,522 residents in each ABS age band.
Population trend, 2001 to 2025
Estimated resident population of Pinjarra Hills - Pullenvale, the wider ABS statistical area containing Anstead. There is no annual population series published at suburb level, so this describes the surrounding area rather than Anstead itself.
3,926 in 2001 to 5,885 in 2025, up 50%.
Source: Australian Bureau of Statistics. Census of Population and Housing 2021 (General Community Profile) and SEIFA 2021, both published at the Suburbs and Localities level; Regional Population (estimated resident population) at Statistical Area Level 2. Used under CC BY 4.0. Census counts of small populations are randomly adjusted by the ABS to protect confidentiality, so figures for small suburbs are indicative.
Check a specific Anstead address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Anstead planning - frequently asked
Where can I see a flood map of Anstead?
The schematic on this page is a Anstead flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 30% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Anstead address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Anstead flood-prone?
About 30% of Anstead falls within a mapped flood overlay, against a Brisbane City average of 40%. Looking lot by lot, 32% of the 658 properties we analysed in Anstead carry some level of mapped flood risk, including 90 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Anstead bushfire-prone?
Yes - around 81% of Anstead is mapped as bushfire-prone, compared with a Brisbane City average of 27%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Anstead?
The dominant planning zone in Anstead is Conservation, though the suburb also includes Rural residential and Conservation (District). Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Anstead have heritage-listed places?
Anstead has 1 heritage-listed place on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
Is Anstead hilly or flat?
Anstead is gently undulating: the median lot slope is about 9%, and 20% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 9 m to 72 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Anstead?
Across 611 surveyed parcels in Anstead, the median lot size is about 10,076 m². There are also 239 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
What is the population of Anstead?
At the 2021 Census Anstead had 1,522 usual residents, with a median age of 43 and an average household size of 3.1 people. The wider Pinjarra Hills - Pullenvale statistical area, which contains Anstead, went from 3,926 people in 2001 to 5,885 in 2025, up 50%. ABS publishes no annual population series for individual suburbs, so that trend describes the surrounding area rather than Anstead alone.
Is Anstead an advantaged suburb?
On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Anstead scores 1120 and sits in decile 10 of 10 nationally and decile 10 within Queensland - decile 1 being the most disadvantaged tenth of Australian suburbs and decile 10 the least. The national average score is 1000. SEIFA summarises income, education, occupation and housing across the whole suburb, so it describes the area, not any particular household in it.
What is the median household income in Anstead?
Median household income in Anstead was $2,926 a week at the 2021 Census, against $2,122 for the typical suburb in Brisbane City. Median rent was $490 a week and the median mortgage repayment $2,383 a month. These are 2021 Census figures and have not been indexed to today.
Do I need a planning report for a Anstead property?
A Anstead planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.