Pullenvale flood map & planning overlays

A planning-constraint profile of Pullenvale (Brisbane City, QLD) - 19.29 km², mapped from live council and state overlay data. This suburb is highly constrained.
Profile updated 19 September 2026.

Elevation hillshade with street names, clipped to Pullenvale's boundary, with the flood, bushfire and environmental overlays drawn on top.

Nearby suburbs, nearest first

How common is mapped flood risk across Pullenvale properties?

Overlay percentages say how much land is constrained; these figures say how many properties are actually touched in a suburb-wide analysis of 1,219 Pullenvale properties. No individual property result is identified on this page.

Pullenvale flood history and overland flow

These are suburb-wide totals across 1,219 analysed properties. They show how common each mapped category is across Pullenvale; they do not identify or describe any individual property.

Recorded historical flood mapping

15.4%

188 analysed properties intersect at least one mapped historical event extent.

  • February 2022: 179
  • Historic Flood 1974: 60
  • January 2011: 28

Mapped overland flow

58.5%

713 analysed properties carry a mapped overland-flow category.

  • Low: 69
  • Medium: 240
  • High: 393
  • Affected: 11

Source: Brisbane City Council flood mapping, aggregated by LayeredGeo. Categories are only shown where at least five analysed properties share them. An address-level check is still required to determine whether a particular lot is mapped.

Pullenvale at a glance

Parcels 1,133 Median lot 10,144 m² Mapped easements 573 Schools in suburb 1 Landslide overlay <1%

Schools in and near Pullenvale

Public school-location data shows availability across the suburb. These figures do not rate schools and do not assign a particular address to a catchment.

Inside the suburb boundary

1

1 school providing primary years and 0 providing secondary years. A combined school may be counted in both teaching levels.

Nearest school availability

Primary: inside the suburb

Secondary: 1.45 km from the suburb boundary

Source: Queensland Government school geographic information. Catchment boundaries can divide a suburb and change over time; use the official catchment finder for a specific address.

How Pullenvale is zoned

Rural residential 49%
Environmental management 39%
Rural 9%
Open space (Local) 1%
Extractive industry 1%
Conservation 1%

Selling in Pullenvale? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.

Across its 19.29 km², Pullenvale is highly constrained by planning overlays. About 17% of the suburb sits within a mapped flood overlay, and 82% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Rural residential. The terrain is hilly, and the median lot measures about 10,144 m² across 1,133 parcels.

Recent development applications in Pullenvale

Applications are counted across the whole gazetted suburb from the public Brisbane City Council register. No application address or individual property is published here.

Submitted in the past 12 months

8

Latest included submission: 17 September 2026.

Previous 12 months: 19 (58% lower in the latest period).

Common application types

  • Building work: 5

Counts depend on applications that the council publishes and that can be assigned to a suburb. Categories can overlap when one application covers several types. Totals below five and their latest dates are suppressed. Register last synchronised 20 September 2026. Check the official council register.

Who lives in Pullenvale

Census 2021 figures published by the ABS for the Pullenvale suburb boundary itself, not a wider region.

Population
3,276
usual residents, 2021
Median age
43
years
Median household income
$4,149
per week, Brisbane City suburb typical $2,122
Median rent
$685
per week, Brisbane City suburb typical $410
Median mortgage
$3,033
per month
Household size
3.2
people, average

Socio-economic standing

ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.

Advantage and disadvantage (IRSAD) Decile 10
most disadvantagedleast disadvantaged

Score 1180, and decile 10 within Queensland. The national average is 1000.

Relative disadvantage (IRSD) Decile 10
most disadvantagedleast disadvantaged

Age profile

Share of Pullenvale's 3,276 residents in each ABS age band.

0-4 3.5%
5-14 16.3%
15-19 10.2%
20-24 5.4%
25-34 4.8%
35-44 11.9%
45-54 18.9%
55-64 15.1%
65-74 8.6%
75-84 4.0%
85+ 1.3%

Population trend, 2001 to 2025

Estimated resident population of Pinjarra Hills - Pullenvale, the wider ABS statistical area containing Pullenvale. There is no annual population series published at suburb level, so this describes the surrounding area rather than Pullenvale itself.

3,926 in 2001 to 5,885 in 2025, up 50%.

Source: ABS Census 2021 and SEIFA 2021 (Suburbs and Localities), Regional Population (SA2), CC BY 4.0. Small counts are randomly adjusted by the ABS.

Pullenvale property market snapshot

Queensland Government publishes this as a SA2 market series for Pinjarra Hills - Pullenvale, the wider statistical area containing Pullenvale. It is not a valuation and is not specific to this suburb or any individual property.

House sales

$2,062,500

Median sale price from 82 sales over 12 months to March 2026.

Source: Queensland Government Statistician's Office (QGSO). View the source profile. The same SA2 figure can appear on several suburb pages within that statistical area.

Pullenvale data sources and coverage

“Not mapped” means we hold no source layer for this suburb - never an all-clear.

DatasetCoveragePublisher
Flood mappingMappedthe relevant council planning scheme and Queensland Government spatial data
Bushfire-prone mappingMappedthe relevant council planning scheme and Queensland Government spatial data
ZoningMappedthe relevant council planning scheme and Queensland Government spatial data
Heritage and environmentMapped where publishedthe relevant council planning scheme and Queensland Government spatial data
Aircraft noise contours (ANEF)Not heldthe relevant council planning scheme and Queensland Government spatial data, Defence
DemographicsAvailableAustralian Bureau of Statistics (2021 Census and SEIFA)
School availabilityAvailableQueensland Government
Market statisticsAvailable at SA2 levelQueensland Government Statistician's Office (QGSO)
Development applicationsAvailable as suburb totalsBrisbane City Council

Profile last materially updated 19 September 2026. See the methodology and full source list. Source data changes over time and critical decisions should be checked with the responsible authority.

Check a specific Pullenvale address

See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.

Published flood models are held here: a Flood Model Report is available for about 1,200 Pullenvale addresses (+$9 with the planning report).

The Terrain Report shows the fall of the block - contours, cross sections and a 3D model of the lot (+$9 with the planning report).

Building or pricing a slab? The $119 geotechnical desktop report covers geology, soils, bores and an indicative AS 2870 site class for a Pullenvale lot.

See what's in the $9 report →

Pullenvale planning - frequently asked

Is Pullenvale flood-prone?

About 17% of Pullenvale falls within a mapped flood overlay, against the council-wide suburb average of 40%. Across the suburb, 21% of the 1,219 properties we analysed carry some level of mapped flood risk, including 211 rated high risk or historically affected.

Is Pullenvale bushfire-prone?

Around 82% of Pullenvale is mapped as bushfire-prone, compared with a Brisbane City average of 27%.

What is the zoning in Pullenvale?

The dominant planning zone in Pullenvale is Rural residential, though the suburb also includes Environmental management and Rural.

Does Pullenvale have heritage-listed places?

Pullenvale has 1 heritage-listed place on record.

Is Pullenvale hilly or flat?

Pullenvale is hilly: the median ground slope is about 17%, and 63% of measured points sit on grades of 15% or steeper. Ground level runs from roughly 18 m to 137 m AHD across the suburb.

What is the typical lot size in Pullenvale?

Across 1,133 surveyed parcels in Pullenvale, the median lot size is about 10,144 m². There are also 573 registered easements mapped in the suburb.

What is the population of Pullenvale?

At the 2021 Census Pullenvale had 3,276 usual residents, with a median age of 43 and an average household size of 3.2 people. The wider Pinjarra Hills - Pullenvale statistical area, which contains Pullenvale, went from 3,926 people in 2001 to 5,885 in 2025, up 50%.

Is Pullenvale an advantaged suburb?

On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Pullenvale scores 1180 and sits in decile 10 of 10 nationally and decile 10 within Queensland (decile 1 is the most disadvantaged tenth, decile 10 the least).

What is the median household income in Pullenvale?

Median household income in Pullenvale was $4,149 a week at the 2021 Census, against $2,122 for the typical suburb in Brisbane City. Median rent was $685 a week and the median mortgage repayment $3,033 a month.

Compare nearby suburbs

Nearby suburbDistanceFlood mappedBushfire-prone
Pinjarra Hills 2.9 km 53% 52%
Anstead 3.3 km 31% 81%
Brookfield 3.6 km 18% 76%
Westlake 4.0 km 69% 19%
Bellbowrie 4.4 km 48% 44%
Kenmore Hills 4.5 km 18% 87%
Kenmore 4.5 km 36% 46%
Jindalee 4.9 km 71% 19%
Mount Ommaney 5.0 km 46% 18%
Riverhills 5.1 km 69% 22%

See all Brisbane City suburb profiles →