Farleigh flood map & planning overlays
A planning-constraint profile of Farleigh (Mackay Regional, QLD) - 28.88 km², mapped from live council and state overlay data. This suburb is moderately constrained.
Constraint readout
28.88 km² - this suburb is moderately constrained by planning overlays.
Elevation hillshade with street names, clipped to Farleigh's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Farleigh flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 393 Farleigh properties.
Lot-level readout
Flood-risk rating across all 393 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Farleigh.
Farleigh at a glance
How Farleigh is zoned
Selling in Farleigh? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 28.88 km², Farleigh is moderately constrained by planning overlays. About 20% of the suburb sits within a mapped flood overlay, and 6% is flagged bushfire-prone. The dominant land-use zone is Rural. The terrain is gently undulating, and the median lot measures about 8,504 m² across 400 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Farleigh address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Farleigh planning - frequently asked
Where can I see a flood map of Farleigh?
The schematic on this page is a Farleigh flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 20% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Farleigh address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Farleigh flood-prone?
About 20% of Farleigh falls within a mapped flood overlay, against a Mackay Regional average of 54%. Looking lot by lot, 1% of the 393 properties we analysed in Farleigh carry some level of mapped flood risk. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Farleigh bushfire-prone?
Yes - around 6% of Farleigh is mapped as bushfire-prone, compared with a Mackay Regional average of 26%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Farleigh?
The dominant planning zone in Farleigh is Rural, though the suburb also includes Rural residential and High impact industry. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Farleigh have heritage-listed places?
No heritage-listed places are on record within Farleigh. Even so, it is worth confirming for an individual property before any works.
Is Farleigh hilly or flat?
Farleigh is gently undulating: the median lot slope is about 5%, and 21% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 23 m to 97 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Farleigh?
Across 400 surveyed parcels in Farleigh, the median lot size is about 8,504 m². There are also 80 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Do I need a planning report for a Farleigh property?
A Farleigh planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.