Mount Stuart flood map & planning overlays
A planning-constraint profile of Mount Stuart (Townsville City, QLD) - 70.09 km², mapped from live council and state overlay data. This suburb is highly constrained.
Constraint readout
70.09 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Mount Stuart's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Mount Stuart flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 28 Mount Stuart properties.
Lot-level readout
Flood-risk rating across all 28 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Mount Stuart.
Mount Stuart at a glance
How Mount Stuart is zoned
Selling in Mount Stuart? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 70.09 km², Mount Stuart is highly constrained by planning overlays. About 11% of the suburb sits within a mapped flood overlay, and 94% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Open Space. The terrain is hilly, and the median lot measures about 16,973 m² across 37 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Mount Stuart address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Mount Stuart planning - frequently asked
Where can I see a flood map of Mount Stuart?
The schematic on this page is a Mount Stuart flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 11% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Mount Stuart address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Mount Stuart flood-prone?
About 11% of Mount Stuart falls within a mapped flood overlay, against a Townsville City average of 62%. Looking lot by lot, 0% of the 28 properties we analysed in Mount Stuart carry some level of mapped flood risk. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Mount Stuart bushfire-prone?
Yes - around 94% of Mount Stuart is mapped as bushfire-prone, compared with a Townsville City average of 50%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Mount Stuart?
The dominant planning zone in Mount Stuart is Open Space, though the suburb also includes Rural and Community Facilities. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Mount Stuart have heritage-listed places?
Mount Stuart has 1 heritage-listed place on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
Is Mount Stuart hilly or flat?
Mount Stuart is hilly: the median lot slope is about 16%, and 54% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 22 m to 583 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Mount Stuart?
Across 37 surveyed parcels in Mount Stuart, the median lot size is about 16,973 m². There are also 36 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Do I need a planning report for a Mount Stuart property?
A Mount Stuart planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.