Salisbury flood map & planning overlays
A planning-constraint profile of Salisbury (Brisbane City, QLD) - 4.6 km², mapped from live council and state overlay data. This suburb is highly constrained.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
4.6 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Salisbury's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Salisbury flood risk at the property level
Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 3,425 Salisbury properties.
Lot-level readout
Flood-risk rating across all 3,425 properties
From LayeredGeo's lot-risk engine: council flood overlays, historical flooding and terrain, resolved to each individual lot in Salisbury.
Salisbury at a glance
How Salisbury is zoned
Selling in Salisbury? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 4.6 km², Salisbury is highly constrained by planning overlays. About 28% of the suburb sits within a mapped flood overlay, and 16% is flagged bushfire-prone. There are 15 heritage-listed sites on record, and the dominant land-use zone is Low density residential. The terrain is gently undulating, and the median lot measures about 620 m² across 3,035 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Who lives in Salisbury
Census 2021 figures published by the ABS for the Salisbury suburb boundary itself, not a wider region.
Socio-economic standing
ABS SEIFA 2021 ranks every Australian suburb. Decile 1 is the most disadvantaged tenth of the country, decile 10 the least.
Score 1043, and decile 9 within Queensland. The national average is 1000.
Age profile
Share of Salisbury's 6,790 residents in each ABS age band.
Population trend, 2001 to 2025
Estimated resident population of Salisbury - Nathan, the wider ABS statistical area containing Salisbury. There is no annual population series published at suburb level, so this describes the surrounding area rather than Salisbury itself.
6,571 in 2001 to 8,341 in 2025, up 27%.
Source: Australian Bureau of Statistics. Census of Population and Housing 2021 (General Community Profile) and SEIFA 2021, both published at the Suburbs and Localities level; Regional Population (estimated resident population) at Statistical Area Level 2. Used under CC BY 4.0. Census counts of small populations are randomly adjusted by the ABS to protect confidentiality, so figures for small suburbs are indicative.
Check a specific Salisbury address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Salisbury planning - frequently asked
Where can I see a flood map of Salisbury?
The schematic on this page is a Salisbury flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 28% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Salisbury address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Salisbury flood-prone?
About 28% of Salisbury falls within a mapped flood overlay, against a Brisbane City average of 40%. Looking lot by lot, 16% of the 3,425 properties we analysed in Salisbury carry some level of mapped flood risk, including 111 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Salisbury bushfire-prone?
Yes - around 16% of Salisbury is mapped as bushfire-prone, compared with a Brisbane City average of 27%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Salisbury?
The dominant planning zone in Salisbury is Low density residential, though the suburb also includes General industry A and Conservation (Metropolitan). Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Salisbury have heritage-listed places?
Salisbury has 15 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
Is Salisbury hilly or flat?
Salisbury is gently undulating: the median lot slope is about 6%, and 2% of properties sit on slopes of 15% or steeper. Ground level runs from roughly 11 m to 46 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.
What is the typical lot size in Salisbury?
Across 3,035 surveyed parcels in Salisbury, the median lot size is about 620 m². There are also 323 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Does Salisbury have a train station?
Yes - Salisbury has 1 train station: Salisbury station. It is also served by 45 bus stops.
What is the population of Salisbury?
At the 2021 Census Salisbury had 6,790 usual residents, with a median age of 35 and an average household size of 2.7 people. The wider Salisbury - Nathan statistical area, which contains Salisbury, went from 6,571 people in 2001 to 8,341 in 2025, up 27%. ABS publishes no annual population series for individual suburbs, so that trend describes the surrounding area rather than Salisbury alone.
Is Salisbury an advantaged suburb?
On the ABS SEIFA 2021 index of relative socio-economic advantage and disadvantage (IRSAD), Salisbury scores 1043 and sits in decile 9 of 10 nationally and decile 9 within Queensland - decile 1 being the most disadvantaged tenth of Australian suburbs and decile 10 the least. The national average score is 1000. SEIFA summarises income, education, occupation and housing across the whole suburb, so it describes the area, not any particular household in it.
What is the median household income in Salisbury?
Median household income in Salisbury was $2,133 a week at the 2021 Census, against $2,122 for the typical suburb in Brisbane City. Median rent was $400 a week and the median mortgage repayment $2,000 a month. These are 2021 Census figures and have not been indexed to today.
Do I need a planning report for a Salisbury property?
A Salisbury planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.