Southside flood map & planning overlays
A planning-constraint profile of Southside (Gympie Regional, QLD) - 18.64 km², mapped from live council and state overlay data. This suburb is highly constrained.
Constraint readout
18.64 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Southside's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Southside at a glance
How Southside is zoned
Selling in Southside? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.
Across its 18.64 km², Southside is highly constrained by planning overlays. About 58% of the suburb sits within a mapped flood overlay, and 35% is flagged bushfire-prone. There are 3 heritage-listed sites on record, and the dominant land-use zone is Limited Development (Constrained Land). The median lot measures about 904 m² across 3,624 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Check a specific Southside address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Southside planning - frequently asked
Where can I see a flood map of Southside?
The schematic on this page is a Southside flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 58% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Southside address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Southside flood-prone?
About 58% of Southside falls within a mapped flood overlay, against a Gympie Regional average of 21%. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Southside bushfire-prone?
Yes - around 35% of Southside is mapped as bushfire-prone, compared with a Gympie Regional average of 67%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Southside?
The dominant planning zone in Southside is Limited Development (Constrained Land), though the suburb also includes Residential Living and Rural Residential. Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Southside have heritage-listed places?
Southside has 3 heritage-listed places on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.
What is the typical lot size in Southside?
Across 3,624 surveyed parcels in Southside, the median lot size is about 904 m². There are also 994 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Does Southside have a train station?
There is no train station inside Southside itself. The suburb is served by 14 bus stops.
Do I need a planning report for a Southside property?
A Southside planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.