Mount Tassie flood map & planning overlays
A planning-constraint profile of Mount Tassie
(Latrobe, VIC) - 19.54 km², mapped from live council and
state overlay data. This suburb is highly constrained.
Profile updated 6 September 2026.
Everything below is suburb-wide. Overlays change block to block - see which ones actually touch your lot. The map is free.
Constraint readout
19.54 km² - this suburb is highly constrained by planning overlays.
Elevation hillshade with street names, clipped to Mount Tassie's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.
Nearby suburbs, nearest first
Mount Tassie at a glance
How Mount Tassie is zoned
Selling in Mount Tassie? The zoning and planning overlays on this page are the controls a Section 32 vendor statement discloses - a $9 planning report pulls them at the lot level for any Mount Tassie address.
Across its 19.54 km², Mount Tassie is highly constrained by planning overlays. Flood mapping covers the suburb and none of it falls within a mapped flood overlay, and 100% is flagged bushfire-prone. The dominant land-use zone is Farming Zone (FZ1). The median lot measures about 173,346 m² across 47 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.
Mount Tassie data sources and coverage
Every figure below is an aggregate for the suburb boundary. “Not mapped” means LayeredGeo does not hold a source layer covering this suburb; it is never an all-clear for a particular property.
| Dataset | Coverage | Publisher |
|---|---|---|
| Flood mapping | Mapped | Vicmap Planning and Victorian Government spatial services |
| Bushfire-prone mapping | Mapped | Vicmap Planning and Victorian Government spatial services |
| Zoning | Mapped | Vicmap Planning and Victorian Government spatial services |
| Heritage and environment | Mapped where published | Vicmap Planning and Victorian Government spatial services |
| Aircraft noise contours (ANEF) | Not held | Vicmap Planning and Victorian Government spatial services, Defence |
| Demographics | Not available | Australian Bureau of Statistics (2021 Census and SEIFA) |
Profile last materially updated 6 September 2026. See the methodology and full source list. Source data changes over time and critical decisions should be checked with the responsible authority.
What a $9 report adds for a Mount Tassie address
This page is the suburb; the report is your lot. For any Mount Tassie address it resolves, on the lot boundary:
- The zone and every planning overlay that touches the lot, in the scheme's own labels
- Which flood overlay categories reach the lot
- Whether the lot is in bushfire-prone mapping, and what that triggers for a build
- A coverage disclosure: exactly which layers were, and were not, assessed
The interactive map is free - check an address below.
Geotechnical desktop report for a Mount Tassie lot
The planning report tells you what you may build. The geotechnical desktop report tells you what the ground under a Mount Tassie address is likely to do - before you pay for a site investigation.
- Mapped geology and soil landscape on the lot
- Indicative AS 2870 site class, with the evidence behind it
- Nearby bore logs and groundwater records
- Acid sulfate soil and reactive clay screening
- Contours, slope and site elevation
- What the desktop evidence cannot tell you, stated plainly
Check a specific Mount Tassie address
See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.
See what's in the $9 report →Mount Tassie planning - frequently asked
Where can I see a flood map of Mount Tassie?
The schematic on this page is a Mount Tassie flood map: the mapped flood overlays drawn over the suburb's terrain and street grid. Flood lines vary block to block, so for a specific property use the free interactive map - search any Mount Tassie address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.
Is Mount Tassie flood-prone?
Flood mapping covers Mount Tassie and none of the suburb falls within a mapped flood overlay (the council-wide suburb average is 9%). Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.
Is Mount Tassie bushfire-prone?
Around 100% of Mount Tassie is mapped as bushfire-prone, compared with a Latrobe average of 100%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.
What is the zoning in Mount Tassie?
The dominant planning zone in Mount Tassie is Farming Zone (FZ1), though the suburb also includes Transport Zone (TRZ2) and Farming Zone (FZ). Zoning sets what you can build and do on a site, and can differ lot by lot.
Does Mount Tassie have heritage-listed places?
No heritage-listed places are on record within Mount Tassie. Even so, it is worth confirming for an individual property before any works.
What is the typical lot size in Mount Tassie?
Across 47 surveyed parcels in Mount Tassie, the median lot size is about 173,346 m². There are also 15 registered easements mapped in the suburb - an easement can restrict where you can build, so always check the title and overlays for the specific lot.
Do I need a planning report for a Mount Tassie property?
A Mount Tassie planning report pulls every overlay - zoning, flood, bushfire, heritage, environmental and noise - that touches a single lot, on live council and state data. The interactive map preview is free; the full PDF report is $9.
Compare nearby suburbs
| Nearby suburb | Distance | Flood mapped | Bushfire-prone |
|---|---|---|---|
| Callignee South Wellington |
4.1 km | 0% | 100% |
| Balook | 4.3 km | 0% | 100% |
| Koornalla | 5.3 km | 7% | 100% |
| Blackwarry Wellington |
5.6 km | 0% | 100% |
| Callignee | 7.8 km | 3% | 100% |
| Callignee North Wellington |
9.0 km | 0% | 100% |
| Tarra Valley Wellington |
9.2 km | 0% | 100% |
| Jeeralang | 9.2 km | 0% | 100% |
| Carrajung Wellington |
10.4 km | 0% | 100% |
| Macks Creek Wellington |
11.1 km | 4% | 100% |