Planning Maps / Areas / Redland City / Peel Island

Peel Island flood map & planning overlays

A planning-constraint profile of Peel Island (Redland City, QLD) - 12.41 km², mapped from live council and state overlay data. This suburb is highly constrained.

Elevation hillshade with street names, clipped to Peel Island's boundary, with the flood, bushfire and environmental overlays drawn on top. It shows where constraints fall; the interactive map shows them on your exact address.

Peel Island flood risk at the property level

Overlay percentages say how much land is constrained; these figures say how many properties are actually touched, from our lot-by-lot analysis of 1 Peel Island properties.

Peel Island at a glance

Parcels 4 Median lot 2,414,911 m²

How Peel Island is zoned

Conservation 100%

Selling in Peel Island? The lot-level zone is the zoning Part 3 of Queensland's Form 2 seller disclosure statement asks for - see our Form 2 planning data guide.

Across its 12.41 km², Peel Island is highly constrained by planning overlays. About 21% of the suburb sits within a mapped flood overlay, and 36% is flagged bushfire-prone. There is 1 heritage-listed site on record, and the dominant land-use zone is Conservation. The terrain is largely flat, and the median lot measures about 2,414,911 m² across 4 parcels. These figures are suburb-wide - the overlays that actually apply to a given lot can differ block to block, which is what a property-level check tells you.

Check a specific Peel Island address

See exactly which overlays touch a single property - the interactive map is free. Need it on paper? A full planning PDF is just $9.

See what's in the $9 report →

Peel Island planning - frequently asked

Where can I see a flood map of Peel Island?

The schematic on this page is a Peel Island flood map: the mapped flood overlays drawn over the suburb's terrain and street grid, covering about 21% of the suburb. Flood lines vary block to block, so for a specific property use the free interactive map - search any Peel Island address and it shows the flood, zoning and bushfire mapping on the exact lot boundary.

Is Peel Island flood-prone?

About 21% of Peel Island falls within a mapped flood overlay, against a Redland City average of 22%. Looking lot by lot, 100% of the 1 properties we analysed in Peel Island carry some level of mapped flood risk, including 1 rated high risk or historically affected. Flood overlays vary block to block, so whether a particular lot is affected needs a property-level check.

Is Peel Island bushfire-prone?

Yes - around 36% of Peel Island is mapped as bushfire-prone, compared with a Redland City average of 41%. A bushfire-prone designation can trigger additional building requirements, so check the specific address.

What is the zoning in Peel Island?

The dominant planning zone in Peel Island is Conservation. Zoning sets what you can build and do on a site, and can differ lot by lot.

Does Peel Island have heritage-listed places?

Peel Island has 1 heritage-listed place on record. Heritage listing affects what you can alter or demolish, so confirm whether a specific property is listed or near a heritage place.

Is Peel Island hilly or flat?

Peel Island is largely flat: the median lot slope is about 1%. Ground level runs from roughly 15 m to 15 m AHD across the suburb. Slope drives site costs - cut and fill, retaining walls and driveway grades - so it is worth knowing before you commit to a sloping block.

What is the typical lot size in Peel Island?

Across 4 surveyed parcels in Peel Island, the median lot size is about 2,414,911 m².

Do I need a planning report for a Peel Island property?

A Peel Island planning report pulls every overlay - zoning, flood, bushfire, heritage and environmental - that touches a single lot, on live council and state data. The interactive map preview is free; a full PDF report is $9.

Other suburbs in Redland City

See all Redland City suburb profiles →