BAL assessment: what it involves, who does it and what it costs

A BAL assessment is a site inspection that sets the bushfire attack level (BAL) for a building on one particular block, using the Australian Standard AS 3959. The assessor classifies the vegetation around the building (within 100 metres, or 140 metres in NSW), measures how far it is from the building and the slope of the land under it, and writes a report with a site plan and the BAL. It is usually done by a bushfire consultant: in NSW one accredited under the BPAD scheme, and in Tasmania an accredited bushfire hazard practitioner. In some areas the council or the fire service does it. Prices vary. As one example, Nillumbik Shire Council in Victoria charges $400 for a BAL report (fee correct from 1 July 2026).

You need one before building a new house or extension on land in a mapped bushfire prone area. What each of the six ratings means for the build is covered in our BAL rating explainer. This guide covers the assessment itself.

When do you need a BAL assessment?

The trigger is the map. If the lot is inside the state or council bushfire prone area (see where to find the bushfire prone area map) and you are building, the building approval needs a BAL for the design. Some examples from the authorities' own pages:

  • NSW. A complying development certificate on bush fire prone land needs a BAL certificate assessed against Planning for Bush Fire Protection 2019. Hornsby Shire Council, for example, says the certificate "must be obtained to accompany a Complying Development Certificate Application".
  • South Australia. If the property is in a high bushfire hazard overlay, the CFS says you "need to get a BAL assessment undertaken for your property".
  • ACT. For a block in the bushfire prone area on the ACTmapi Bushfire Map, the approval "may include a condition that a specific BAL has been identified or that a site-specific BAL assessment report prepared by a suitably qualified bushfire consultant be undertaken" (Access Canberra Construction Note 2026-04).

Get it before the house is designed, not after. A higher BAL changes the windows, cladding and decks, and the main way to lower it is to move the house further from the bush.

What the assessor looks at

A BAL assessment works from four things:

  • Vegetation. The bush, scrub or grassland around the site is sorted into classes such as forest, woodland, shrubland and grassland. Vegetation within 100 metres of the building counts, except in NSW, where Planning for Bush Fire Protection 2019 (Appendix 1) assesses vegetation out to 140 metres. In NSW the slope is still assessed over 100 metres.
  • Distance. How far the building is from the edge of that vegetation. This is usually the biggest single factor.
  • Effective slope. The slope of the land under the vegetation, measured relative to the building. Bush on a slope running downhill away from the house counts for more, because fire runs faster uphill. Flat land and upslopes are treated as one category.
  • Fire weather. A fire danger index set for the region.

There are two methods. Method 1 is the simplified procedure in AS 3959, which reads the BAL from tables. Method 2 is a detailed calculation, used for sites that do not fit the tables. For example, the simplified method does not apply where the effective slope under the vegetation is more than 20 degrees downslope.

What is in a BAL assessment report?

The report sets out how the BAL was reached, so a certifier can check it. Fire Protection Association Australia's competencies for BAL assessors include measuring "the appropriate slopes under the classified vegetation and distances between the classified vegetation and the proposed building", and preparing "a site plan that identifies the features used to assess and determine the Bushfire Attack Level". A typical report has:

  • a site plan showing the proposed building, the vegetation and the distances
  • the vegetation class and effective slope in each direction
  • the method used (Method 1 or 2)
  • the BAL for the building, which sets its construction requirements under AS 3959

The assessment belongs to a particular design. The South Australian CFS says "Your approval is only valid for the plans that were assessed", and that changing the house location or layout may change the BAL and need a new assessment.

Who does a BAL assessment, state by state

State Who assesses
NSW A consultant accredited under Fire Protection Association Australia's BPAD scheme, or a council certifier. BPAD Level 2 covers Method 1 and Level 3 covers Method 2; Level 1 does not apply in NSW.
Victoria Some councils prepare BAL reports to AS 3959: Nillumbik Shire Council charges $400. Elsewhere, ask your building surveyor who they will accept the assessment from.
Queensland Bushfire prone areas are set under the Building Regulation, and Queensland has adopted AS 3959-2018. Ask your building certifier what assessment they need.
South Australia The CFS Development Assessment Service, for land in the high risk bushfire overlay. Its fees are set each year in the Government Gazette.
Tasmania A private bushfire hazard practitioner accredited by the Chief Officer of the Tasmania Fire Service, who determines the BAL and prepares a bushfire hazard report or management plan.
ACT A suitably qualified bushfire consultant, where the approval requires one. Applications may be referred to the ACT Emergency Services Agency.

How much does a BAL assessment cost?

There is no set price. Councils that offer the service publish a fee: Nillumbik Shire Council charges $400 for a BAL report from 1 July 2026, and South Australia's CFS sets its fees in the Government Gazette each year. Private consultants set their own fees. Get two quotes, and ask whether the price covers a site visit, a Method 2 calculation if the site needs one, and a revised report if the design changes.

What you can check before booking an assessor

Three things decide most of the answer, and you can get a first look at each from a desk:

  1. Is the lot mapped bushfire prone? If not, a BAL is generally not needed for the building approval.
  2. What vegetation is within 100 m (140 m in NSW)? A reserve, a bush gully or a paddock next door matters more than a mown park. An aerial photo shows it.
  3. Which way does the land fall towards it? Bush below the house on a downslope pushes the BAL up.

Our $9 Property Report answers the first question, and the Terrain Report adds the lot's slope and the landform around it. Neither sets a BAL: classifying the vegetation and measuring the effective slope under it is the assessor's job on site.

Common questions

What is a BAL assessment?

It is a site assessment under AS 3959 that sets the bushfire attack level for a building on a particular block. It looks at the vegetation within 100 metres (140 metres in NSW), the distance to it, the slope under it and the regional fire weather, and the resulting BAL sets how the building has to be built.

Who can do a BAL assessment in NSW?

A bushfire consultant accredited under Fire Protection Association Australia's BPAD scheme (Level 2 for the simplified method, Level 3 for the detailed method), or a council certifier. Some councils, such as Hornsby, issue BAL certificates for complying development.

How much does a BAL assessment cost?

It varies by provider and site. Nillumbik Shire Council in Victoria charges $400 for a BAL report from 1 July 2026. Private consultants set their own fees, and a site that needs the detailed Method 2 calculation takes more work.

How long is a BAL assessment valid?

It is tied to the plans that were assessed rather than a set period. The South Australian CFS says an approval is only valid for those plans, and a change to the house location or layout may need a new assessment.

Does a BAL assessment look at land outside my block?

Yes. Vegetation within 100 metres of the building counts (140 metres in NSW, where the slope is still assessed over 100 metres), wherever it is, so a neighbouring reserve or bush on the next lot can set the BAL.

Before you book the assessor

Is the lot mapped bushfire prone, and how does it fall?

The Property Report shows whether the lot sits in mapped bushfire prone land and its category, alongside zoning, flood and heritage overlays. With the Terrain Report ($18 for both) you also get the lot's slope and fall and a 3D model of the landform around it. Neither sets a BAL. The map preview is free and the PDF is $9.

Check an address → See a sample report

About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.

← All articles