Sewer service diagram in NSW: what it shows and how to get one

A sewer service diagram is a plan of the private sewer pipes on a property: the drains that run from the toilets, kitchen and laundry to the connection with the public sewer. In New South Wales you buy it from the water authority for the area. That is Sydney Water in Greater Sydney, where it costs $33.67 online in 2026-27, Hunter Water around Newcastle, and the local council in most of regional NSW. The diagram is drawn from the plumbing records, so it shows roughly where the pipes run, not their exact position.

People also call it a sewer diagram, a drainage diagram or a house drainage diagram. It is not the same as the plan of the authority's own sewer mains, which is a separate document with a different name.

Sewer service diagram or service location diagram?

There are two different plans, and which one you need depends on the job.

Document What it shows Who sells it Useful for
Sewer service diagram (drainage diagram) The private sewer pipes on the property, up to the connection point Sydney Water, the council in most regional areas Plumbing work, renovations, checking what was approved
Service location print or asset location plan The authority's own pipes and structures on or near the property, and where the property connects Sydney Water, Hunter Water, councils Building near a sewer main, extensions, pools, buying

Sydney Water describes its sewer service diagram as one that "shows the private wastewater pipes on a property", and its service location print as showing "our pipes and structures on a property", including the point where the property connects to the sewer. Hunter Water's asset location plan shows "water and sewer mains, hydrants, sewer manholes (maintenance structures) and other Hunter Water fixtures", and does not show the plumbing inside the lot or stormwater.

If you are planning an extension, a pool or a new house, the plan of the mains matters most, because building over or close to a sewer main needs the authority's approval. Our guide to sewer easements covers those rules state by state.

How to get a Sydney Water sewer diagram

Owners buy it directly through Sydney Water's online Tap in service. The fee is $33.67 in 2026-27 ($32.34 in 2025-26). Most diagrams are available almost straight away. Where Sydney Water has to look into the records first, it can take up to 7 days.

Conveyancers can order through a Property Link broker instead. Sydney Water charges the broker $18.75 in 2026-27, and the broker adds its own fee.

Sydney Water warns that "If there's plumbing that's not on the diagram, it may not have been inspected", and asks owners to call it on 13 20 92 in that case.

Hunter Water: Newcastle, Lake Macquarie, Maitland and Port Stephens

Hunter Water sells an asset location plan of its mains and manholes on or near a property through its Property Self Service Portal, listed at $14.65 on its service location plans page. It cannot issue one for a lot in a subdivision that has not been registered yet.

For a property sale, Hunter Water no longer takes conveyancing applications on its website or over the counter. The sewer diagram for a sale is ordered through an authorised Land Registry Services broker, and Hunter Water says it is usually supplied within hours. Its asset plan does not show the private drains inside the lot. If you need those, ask Hunter Water whether a drainage diagram is held for the property.

Central Coast and regional NSW: ask the council

Outside the Sydney Water and Hunter Water areas, the council is usually the water and sewer authority, so the sewer diagram comes from the council. That includes the Central Coast, where Central Coast Council is the water and sewer authority. Councils often sell two documents: a diagram of the private drains, and a plan of the council's own mains.

Some examples:

  • Albury. AlburyCity sells sewer service diagrams online and processes them within 3 working days. If the land is vacant or there is no diagram on record, the council issues a letter saying so. It also issues a separate mains connection diagram.
  • Coffs Harbour. The council's diagrams show the sanitary drainage only "up to the point of connection within the property boundary". Owners request one by email, and conveyancers use the council's request for certificates form.
  • Elsewhere. Search the council's website for "drainage diagram" or "sewer service diagram". Fees are set each financial year in the council's fees and charges.

How accurate is a sewer diagram?

It is a guide, not a survey. A diagram shows where the pipes were recorded when the plumbing was inspected. It does not show work that was never inspected. Singleton Council says plainly that "Dial Before You Dig responses and sewer diagrams from Council are indicative only", and that only potholing, digging by hand to expose the pipe, gives the exact location.

For the exact line:

  • A plumber with a drain camera and locator can trace the private pipes and mark them on the ground.
  • Before You Dig Australia gives free plans of the authority's mains before any digging, but they are also indicative.
  • Potholing by hand, near the marked line, confirms the depth and position before you dig or pour footings.

What to check if you are buying

  1. Look in the contract for sale. Check whether a sewer diagram or service location diagram is already attached before you order your own.
  2. Compare the diagram with the house. An extension, granny flat or extra bathroom that is not on the diagram may not have been inspected.
  3. Find the main. A sewer main through the backyard limits where you can build, and it may run under the lot without an easement on the title.
  4. Look for maintenance holes. A concrete or metal lid in the yard is often a sewer access point that has to stay clear.

What our maps show for an NSW address

We cannot issue a sewer service diagram. Only the water authority holds the plumbing records. What the Property Report does show is the public network around the lot, where we hold it:

  • Sewer mains in the Hunter Water area (Newcastle, Lake Macquarie, Maitland, Port Stephens, Cessnock, Dungog and Singleton) and in Albury, Bellingen, Coffs Harbour, Dubbo, Murray River, Nambucca and Tweed council areas.
  • Stormwater mains in those areas where the owner publishes them, and in the City of Sydney, Canterbury-Bankstown, Liverpool, Northern Beaches, Sutherland and Waverley council areas.
  • Registered easements drawn on the lot, alongside zoning and the flood, bushfire and heritage overlays.

We do not hold Sydney Water's or Central Coast Council's sewer network. In those areas the report says sewer was not assessed rather than reporting no main nearby. In every area, the private pipes inside the lot and the house connection are not shown. That is what the sewer service diagram is for.

Common questions

How do I get a sewer diagram for my property?

Order it from the water authority for the area. In Greater Sydney that is Sydney Water, online through Tap in. Around Newcastle and the lower Hunter it is Hunter Water. In most of regional NSW, including the Central Coast, it is the local council.

How much is a Sydney Water sewer diagram?

$33.67 through Sydney Water's Tap in service in 2026-27, up from $32.34 in 2025-26. Through a Property Link broker the Sydney Water fee is $18.75 plus the broker's own charge.

Does a sewer diagram show the exact location of the pipes?

No. It shows the pipes as they were recorded, and authorities describe their diagrams as indicative only. A plumber with a drain camera and locator, or careful hand digging, finds the exact line.

What if there is no sewer diagram for my house?

Some properties, often older ones, have no diagram on record. Councils such as AlburyCity issue a letter confirming that none is held. A plumber can trace the drains if you need to know where they run.

Is a sewer diagram the same as a Before You Dig plan?

No. A Before You Dig plan shows the authorities' own pipes and cables in the area, free of charge. A sewer service diagram shows the private drains inside one property and is bought from the water authority.

Not the diagram, the network around it

Mains, easements and overlays for the lot

Where we hold the network (the Hunter and several regional NSW councils, with stormwater in parts of Sydney), the Property Report maps the sewer and stormwater mains around the lot, with registered easements and the flood, bushfire and heritage overlays. It does not show the private pipes. The map preview is free and the PDF is $9.

Check an address → See a sample report

About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.

← All articles