Central Coast flood map and zoning: how to check a property
To check a property on the Central Coast you use Central Coast Council's free online mapping tool. It lets you search any property address and see its zoning, bushfire information and flood mapping, along with the properties around it. For flooding, the council says the tool shows whether a property is subject to a 1 in 100 chance flood and how the property and the streets around it may be affected at different water levels. For a formal flood answer on one lot, the council issues a Flood Information Certificate.
Try it on your own address - free map of every overlay, then a $9 Property Report.
LayeredGeo is not part of Central Coast Council or the NSW Government. The council's tool is free and the right place to start for a property in Gosford, Wyong, The Entrance, Terrigal, Woy Woy, Toukley or anywhere else on the Coast. LayeredGeo's Property Report is a separate $9 PDF that puts the zone and the flood, bushfire and heritage overlays for one address in one document, with a plain-English note for each.
Which planning rules apply
The local plan is the Central Coast Local Environmental Plan 2022. Its flood clauses are 5.21 (flood planning) and 5.22 (special flood considerations). The detailed rules are in the Central Coast Development Control Plan 2022, whose flood chapter is 3.1.
The NSW Planning Portal Spatial Viewer also shows the LEP maps for any NSW address. Our guide to using the Spatial Viewer explains how.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
How to find a property
- Open the council's online mapping tool. The council's Flood risk tools page links to it, along with an instruction guide and the fact sheet on the flood mapping layers.
- Search the property address.
- Read the zone, then check the bushfire layers.
- Open the flood information. The council's fact sheet says the flood tool sits behind the Flooding Information icon on the right of the toolbar.
If you are unsure whether a property is in a floodplain, the council also says you can contact it to confirm.
How to read the flood layers
The council's fact sheet on flood mapping layers explains what each layer means. There are three groups:
- Flood extents and hazard. The extent of the 1 in 100 year flood, and its hazard in six categories, from H1 (generally safe for people, vehicles and buildings) to H6 (all building types considered vulnerable to failure). The hazard is split into separate layers by how the flooding happens, and the same categories are used for the Probable Maximum Flood.
- Flood precincts. These are the areas the LEP and DCP flood rules use (see below).
- Flood emergency response. These let you search an address and see how the property would be affected at different lake levels.
The fact sheet makes a point worth remembering: a 1 in 100 year flood is a hypothetical flood with a 1 in 100 chance of happening in any year. If one happened tomorrow, a flood of the same size could still happen again in the years after.
The four flood precincts
| Precinct | What it is |
|---|---|
| Precinct 1 | The Probable Maximum Flood, the largest flood that could conceivably occur, sometimes called the extent of flood prone land |
| Precinct 2 | The Flood Planning Level: the 1 in 100 year flood plus a freeboard, typically 0.5 m but which may vary. A planning allowance for sea level rise may be added on top |
| Precinct 3 | Flood storage areas |
| Precinct 4 | High hazard areas |
The Flood Planning Level is what sets how high a new floor has to be, so on low land it is the number to ask about.
Lake flooding
Around the lakes, flooding is about how high the lake rises, not only how creeks flow. The council's fact sheet gives an example: in March 2022 Tuggerah Lakes reached 1.35 m above sea level, which it describes as about a 1 in 5 year flood. That is why the emergency layers show properties at a range of lake levels. The council's coastal lagoons page covers lagoon water levels and when it intervenes to open them.
The council also says its flood mapping is continually updated as new information becomes available, so check the date of what you are looking at.
The Flood Information Certificate
For one lot, the council issues a Flood Information Certificate in two speeds:
- Standard: delivered within 15 business days of lodgement.
- Urgent: delivered within 3 business days of lodgement.
To order it online, register an account on the certificate application portal, which is linked from the council's Online services page. A paper application form can be lodged in person at a council customer service centre, and the council does not accept paper forms by email. The council's 2026-27 certificate application form lists the flood certificate as a Flood Planning Level Certificate at $424.55, or $608.15 for the urgent service. The council says flood information about a property will generally not be given over the phone, and it publishes an example certificate on its Planning and development within flood zones page.
The same form lists the section 10.7(2) planning certificate at $73 and the 10.7(2) and (5) certificate at $184.
What the map does not tell you
- It is not a planning certificate. The section 10.7 certificate, issued by the council and attached to a contract for sale, is the formal statement of the planning controls on the land, and the council notes flood-affected land on it. Our guide to reading a section 10.7 certificate explains each part.
- A flood level is not a flood depth at the house. Whether water reaches a floor depends on the ground level and the floor height. Our guide to reading a flood overlay versus actual flood risk explains the difference.
- Local drainage flooding. Not every wet yard is in a mapped flood. The council asks residents who see repeated minor flooding from a stormwater drain, creek or estuary to report it, because it uses those reports to find areas for investigation.
- Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost. Low land around the lakes and estuaries can also hold acid sulfate soils.
Putting the planning layers in one PDF
The council's tool is the official source, so start there. If you are comparing several properties, or want the planning layers and other site data together, LayeredGeo's Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays for an address into a single PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains the utilities publish. The map preview is free and the PDF is $9. Pop in your address or check out a sample report. Our Central Coast flood map by suburb page compares the mapped flood share of each suburb.
If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.
Common questions
Where is the Central Coast flood map? It is in Central Coast Council's online mapping tool, linked from the council's Flood risk tools page. Search the address and open the flood information to see the 1 in 100 year flood extent, hazard, flood precincts and how the property is affected at different lake levels.
How do I get a flood level for a Central Coast property? Apply to the council for a Flood Information Certificate, online through its certificate application portal (you need to register an account) or in person with a paper form. A standard certificate is delivered within 15 business days and an urgent one within 3 business days. The council's 2026-27 form lists the fee at $424.55, or $608.15 urgent.
What is the flood planning level on the Central Coast? The council's fact sheet describes it as the 1 in 100 year flood plus a freeboard, typically 0.5 m but which may vary, with a planning allowance for sea level rise sometimes added on top.
How do I find the zoning of a Central Coast property? Search the address in the council's online mapping tool, or in the NSW Planning Portal Spatial Viewer, and read the zone under the Central Coast LEP 2022.
LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.
Common questions
Where is the Central Coast flood map?
It is in Central Coast Council's online mapping tool, linked from the council's Flood risk tools page. Search the address and open the flood information to see the 1 in 100 year flood extent, hazard, flood precincts and how the property is affected at different lake levels.
How do I get a flood level for a Central Coast property?
Apply to the council for a Flood Information Certificate, online through its certificate application portal (you need to register an account) or in person with a paper form. A standard certificate is delivered within 15 business days and an urgent one within 3 business days. The council's 2026-27 form lists the fee at $424.55, or $608.15 urgent.
What is the flood planning level on the Central Coast?
The council's fact sheet describes it as the 1 in 100 year flood plus a freeboard, typically 0.5 m but which may vary, with a planning allowance for sea level rise sometimes added on top.
How do I find the zoning of a Central Coast property?
Search the address in the council's online mapping tool, or in the NSW Planning Portal Spatial Viewer, and read the zone under the Central Coast LEP 2022.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.
Related articles
Port Macquarie flood map and zoning: how to check a property
Port Macquarie flood map guide: check a property's flood planning area, PMF and zone on the council's Flood Map and the Spatial Viewer, and the 2026 Hastings River study.
17 November 2026Newcastle flood map and zoning: how to check a property
Newcastle flood map guide: use City of Newcastle's flood information viewer and the Spatial Viewer to check a property's flood extent, zone, heritage and mine subsidence.
17 November 2026Tweed flood map and zoning: how to check a property
Tweed flood map guide: use Tweed Shire Council's online maps to check a property's flood planning level, zone and bushfire mapping, and what the flood certificate costs.