Tweed flood map and zoning: how to check a property

Tweed Shire Council's online mapping is a set of free maps, listed on its Mapping and zoning page. To check a property, open the Flood planning maps for the flood level that applies, the Zoning map for the zone and the Planning information map for the other controls. You can search by street address, lot, section and plan, council property number or street name. The council also sells a flood certificate and the section 10.7 planning certificate for a lot.

LayeredGeo is not part of Tweed Shire Council or the NSW Government. The council's maps are free and the right place to start for a property in Tweed Heads, Murwillumbah, Kingscliff, Pottsville or anywhere else in the shire. LayeredGeo's Flood Model Report gives the modelled flood depth and level on the lot where a published flood study covers it, and the $9 Property Report puts the zone and the flood, bushfire and heritage overlays for one address in one PDF.

Which planning rules apply

Three local plans apply in the Tweed. Most land is under the Tweed Local Environmental Plan 2014. The Tweed City Centre LEP 2012 covers the Tweed Heads centre, and the older Tweed LEP 2000 still applies to some land. The council's Zoning map covers all three, so it tells you which plan applies to the lot.

The detailed rules are in the Tweed Development Control Plan. Section A3, Development of Flood Liable Land, sets the flood rules for building.

The council's maps

Map Use it for
Search for a location Finding the lot by address, lot and plan, property number or street
Flood planning maps The flood planning information for a property under DCP Section A3
Zoning The zone under LEP 2000, 2012 or 2014
Planning information The other planning controls on the lot
Environmental and vegetation Vegetation and environmental mapping
Bushfire prone land The council's Bushfire prone land map 2023

The council publishes a short PDF on how to use its online mapping. Its DA Tracker property search also shows the zoning, flooding, bushfire, sensitive coastal areas and acid sulfate soils layers for a property. Layers only appear where they apply.

How to check flooding

Open the Flood planning maps, find the property and read the Defined Flood Event (DFE) and the flood planning level for the lot.

How the Tweed sets its flood level

The Tweed does not use the usual 1 in 100 year flood on its own. Under DCP Section A3, the Defined Flood Event is the highest of:

  • the flood of record, such as the 2022 flood peak;
  • the 1% AEP flood level from the 2009 study;
  • the 0.2% AEP flood level (about a 1 in 500 chance each year) from the 2024 Tweed Valley and 2010 Coastal Creeks studies, which the council adopts as a stand-in for climate change; and
  • a minimum of 2.9 m AHD.

Behind the Murwillumbah CBD levee the historic DFE of 7.0 m AHD applies, and at Mooball, south of the railway embankment, the minimum is 13.0 m AHD.

A freeboard of 0.5 m is added to the DFE to give the flood planning level, which is the minimum habitable floor level for new building. Where a PMF refuge is required, its floor has to sit at the Probable Maximum Flood level.

The studies behind the maps

The council's Flood risk management page lists its studies. The main ones are the Tweed Valley Flood Study Update and Expansion (2024), the first Tweed study to model flooding upstream of Murwillumbah, which takes in the 2017 and 2002 floods and has 2017 and 2022 flood maps in its appendices; the South Murwillumbah floodplain risk management study and plan (2019); the Murwillumbah CBD Levee and Drainage Study (2018, with a 2023 addendum); the Coastal Creeks floodplain risk management study and plan (2015); and the Tweed Heads South Levee and Drainage Study (2026). The council's climate change modelling uses 0.91 m of sea level rise and a 10 per cent increase in rainfall intensity.

Levees reduce the risk, they do not remove it

The 2017 flood undercut the South Murwillumbah riverbank and broke the crest of the levee there, with repairs finished in February 2020. The council warns that when the Murwillumbah levee overtops, the CBD will be under 4 metres of water in less than 3 hours, and that pumping stations do not remove the flood risk completely. A lot behind a levee still carries the levee's DFE, so check it as carefully as any other.

Flood and planning certificates

Certificate What it gives Fee listed by the council
Flood certificate Flood information for the lot $169
Section 10.7(2) planning certificate Zoning, flooding, bushfire, the LEPs and development controls $71
Section 10.7(2) and (5) planning certificate Adds development applications from the last five years, draft plans, contamination, building height and aircraft noise $178

The council lists these on its Buying and selling property page and says planning certificates are generally processed within 5 working days. Check the current fees when you apply. The council's Property Flood Reports, which gave property-specific flood levels, are temporarily unavailable while the system is updated, and the council points to the Flood planning maps in the meantime. Our guide to reading a section 10.7 certificate explains each part.

Other hazards to check

  • Bushfire. The Bushfire prone land map 2023 replaced the 2012 map. The council says you are responsible for checking whether your property is bushfire prone land, and that the map may not be a true indication of bushfire risk. The buffer is 100 m around Category 1 vegetation and 30 m around Categories 2 and 3. Our guide to the bushfire attack level explains what a rating means for building.
  • Acid sulfate soils. The council notes these are common along the Tweed Coast. See our guide to checking acid sulfate soils.
  • Coastal hazards. The council is preparing a Tweed Coast and Estuaries Coastal Management Program. Its 2025 Coastal Hazard Assessment maps are available on request from the council.
  • Koala habitat. The council has a koala habitat restoration map, and our koala habitat map guide explains the state mapping.

What the maps do not tell you

  • A flood level is not a flood depth at the house. Whether water reaches a floor depends on the ground level and the floor height. The council's flood policy says its flood levels should be used with a detailed ground survey. Our guide to reading a flood overlay versus actual flood risk explains the difference.
  • Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost.
  • Development next door. Development applications are in the council's DA Tracker.

Putting the flood and planning layers in one place

The council's maps are the official source, so start there. Where a published flood model covers the lot, LayeredGeo's Flood Model Report lists each one with the modelled depth, velocity and flood level for each event, and checks the roads out of the property against the flood extent. The $9 Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays into one PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains. The map preview is free. Pop in your address or check out a sample report. Our Tweed flood map by suburb page compares the mapped flood share of each suburb.

If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.

Common questions

Where is the Tweed flood map? Tweed Shire Council's Flood planning maps are listed on its Mapping and zoning page. Search the address to see the flood planning information for the property under DCP Section A3.

How is the flood level set in the Tweed? The Defined Flood Event is the highest of the flood of record (such as 2022), the 1% AEP level, the 0.2% AEP level and a minimum of 2.9 m AHD. Behind the Murwillumbah CBD levee it is 7.0 m AHD. A freeboard of 0.5 m is added to give the minimum habitable floor level.

How much is a flood certificate from Tweed Shire Council? The council's Buying and selling property page lists a flood certificate at $169. Check the current fee when you apply.

How do I find the zoning of a Tweed property? Open the council's Zoning map, search the address and read the zone. It covers the Tweed LEP 2014, the Tweed City Centre LEP 2012 and the parts of the shire still under the Tweed LEP 2000.

LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.

Common questions

Where is the Tweed flood map?

Tweed Shire Council's Flood planning maps are listed on its Mapping and zoning page. Search the address to see the flood planning information for the property under DCP Section A3.

How is the flood level set in the Tweed?

The Defined Flood Event is the highest of the flood of record (such as 2022), the 1% AEP level, the 0.2% AEP level and a minimum of 2.9 m AHD. Behind the Murwillumbah CBD levee it is 7.0 m AHD. A freeboard of 0.5 m is added to give the minimum habitable floor level.

How much is a flood certificate from Tweed Shire Council?

The council's Buying and selling property page lists a flood certificate at $169. Check the current fee when you apply.

How do I find the zoning of a Tweed property?

Open the council's Zoning map, search the address and read the zone. It covers the Tweed LEP 2014, the Tweed City Centre LEP 2012 and the parts of the shire still under the Tweed LEP 2000.

LayeredGeo Flood Model Report

How deep does the modelling say it gets here?

Every published flood model that reaches a property, with modelled depth, velocity and flood level for each event and a map of the design flood. $9 PDF, models held for parts of Queensland, NSW, Victoria, Tasmania and the ACT. No account needed.

Get the flood model report - $9 → Property Report instead

About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.

← All articles