Port Macquarie flood map and zoning: how to check a property
To check a property in Port Macquarie-Hastings you use two free maps. The zone and most planning controls are on the NSW Planning Portal Spatial Viewer, which is where Port Macquarie-Hastings Council sends people who ask what zone applies to their land. Flooding is on the council's own Flood Map, which shows the Flood Planning Area and the Probable Maximum Flood extent for an address. For an exact flood level on one lot, the council sells a flood certificate.
Try it on your own address - free map of every overlay, then a $9 Property Report.
LayeredGeo is not part of Port Macquarie-Hastings Council or the NSW Government. The council's tools and the Spatial Viewer are free and the right place to start for a property in Port Macquarie, Wauchope, Laurieton, Lake Cathie or anywhere else in the Hastings. LayeredGeo's Property Report is a separate $9 PDF that puts the zone and the flood, bushfire and heritage overlays for one address in one document, with a plain-English note for each.
Which planning rules apply
The local plan is the Port Macquarie-Hastings Local Environmental Plan 2011. It sets the zone, the height and floor space limits, the minimum lot size and the heritage and hazard maps. The detailed design rules are in the Port Macquarie-Hastings Development Control Plan 2013.
Flood rules come from the council's Flood Policy, adopted on 12 December 2018, and the flood studies behind its maps. The Hastings River study is being updated at the time of writing (see below), so check the date of any flood map you rely on.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
How to find the zone
- Open the NSW Planning Portal Spatial Viewer. No account is needed.
- Search the street address, or the lot and DP.
- Select the property. The panel lists the zone and the other LEP controls, and links to the LEP and DCP.
- Check the hazard layers too. The council notes that the Spatial Viewer shows some of the constraints that apply, such as bushfire and flooding.
Our guide to using the NSW Planning Portal Spatial Viewer goes through each step and its free Property Report PDF.
How to check flooding
The council's Flood Map is linked from its Flood Certificates and Flood Enquiries page. Search an address and it shows two things:
- Flood Planning Area. The land where flood-related planning rules apply. The council builds it from the 1% AEP flood (about a 1 in 100 chance each year), plus a climate change allowance, plus 500 mm of freeboard.
- Probable Maximum Flood (PMF). The largest flood that could reasonably occur. Land inside it is flood prone even where it sits outside the Flood Planning Area.
The council's Floodplain management page also has PDF hazard maps based on a 1 in 100 year flood for six floodplains: the Hastings River, Camden Haven, Lake Cathie, Wrights Creek, the Hibbard Precinct and the North Brother local catchment. The Hastings River maps cover Port Macquarie, Wauchope, Rawdon Island and Telegraph Point, and the Camden Haven maps cover Kendall and Ross Glen, Laurieton, Dunbogan and North Haven, Queens Lake, Lakewood and West Haven, and Watson Taylors Lake. These are older township maps, so treat the online Flood Map as the current view.
How high a new floor has to be
The council's rule for a new habitable floor is the 1% AEP flood level, plus the climate change allowance, plus 500 mm of freeboard. Its Have Your Say glossary describes the climate change allowance as 900 mm of sea level rise by 2100 plus a 10 per cent increase in rainfall intensity. Minor development and non-habitable rooms such as garages use the lower 5% AEP flood level.
The updated Hastings River flood study
Significant flooding in March 2021 triggered an update to the Hastings River Flood Study. After a first round of consultation in 2025, the council commissioned more work, including checking the model against the May 2025 flood and assessing dune breaches and river scour. The updated draft is on exhibition from 26 October 2026, with submissions closing on 7 December 2026.
The council says most of the previously exhibited mapping is unchanged, but the revised PMF modelling identifies some extra properties as potentially flood prone. Owners of those properties are being sent letters, and the council says a letter does not mean the risk has suddenly increased or that the land has been rezoned. The draft mapping on the Have Your Say page can be searched by address, with scenarios to compare and indicative depths.
If you are buying on the Hastings floodplain, look at both the current Flood Map and the draft study before you commit.
Flood certificates and flood enquiries
The council offers two paid products for one property:
| Product | What it gives |
|---|---|
| Flood certificate | Whether the property is affected by riverine or catchment flooding, the Flood Planning Levels that apply and maps of the flood extents. Where no exact spot is given, the highest level on the lot is used |
| Request for flood information | Whether the property is affected by riverine or catchment flooding only, without the Flood Planning Levels or mapping |
The council says it cannot issue a certificate for a property without flood study data, so check the Flood Map first. Fees are in the council's Fees and Charges. A sample certificate (July 2024) is on the Flood Certificates and Flood Enquiries page.
What the maps do not tell you
- They are not a planning certificate. The section 10.7 certificate, issued by the council and attached to a contract for sale, is the formal statement of zoning and constraints such as flood and bushfire prone land. The council sells a 10.7(2) certificate and a 10.7(2) and (5) certificate online. Our guide to reading a section 10.7 certificate explains each part.
- A flood planning level is not a flood depth at the house. Whether water reaches a floor depends on the ground level and the floor height. Our guide to reading a flood overlay versus actual flood risk explains the difference.
- Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost. Low coastal land around the Hastings can also hold acid sulfate soils, which the LEP maps by class.
- Pipes under the lot. The council has a separate underground services map for water, sewer and stormwater mains.
- Development next door. Development applications are searched separately in the council's DA Tracker.
Putting the planning layers in one PDF
The council's Flood Map and the Spatial Viewer are the official sources, so start there. If you are comparing several properties, or want the planning layers and other site data together, LayeredGeo's Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays for an address into a single PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains the utilities publish. The map preview is free and the PDF is $9. Pop in your address or check out a sample report. Our Port Macquarie-Hastings flood map by suburb page compares the mapped flood share of each suburb.
If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.
Common questions
Where is the Port Macquarie flood map? Port Macquarie-Hastings Council's Flood Map is an online map linked from its Flood Certificates and Flood Enquiries page. Search an address to see the Flood Planning Area and the Probable Maximum Flood extent. Older PDF flood hazard maps for each floodplain are on the council's Floodplain management page.
How do I find the zoning of a Port Macquarie property? Use the free NSW Planning Portal Spatial Viewer, which the council points to for zoning. Search the address, select the property and read the zone under the Port Macquarie-Hastings LEP 2011.
How high does a new floor have to be in Port Macquarie-Hastings? A new habitable floor has to sit at the 1% AEP flood level plus a climate change allowance plus 500 mm of freeboard. The council describes the climate change allowance as 900 mm of sea level rise by 2100 plus a 10 per cent increase in rainfall intensity.
Is the Hastings River flood map changing? An updated draft Hastings River Flood Study is on exhibition until 7 December 2026. The council says most mapping is unchanged, but revised PMF modelling identifies some additional properties as potentially flood prone.
LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.
Common questions
Where is the Port Macquarie flood map?
Port Macquarie-Hastings Council's Flood Map is an online map linked from its Flood Certificates and Flood Enquiries page. Search an address to see the Flood Planning Area and the Probable Maximum Flood extent. Older PDF flood hazard maps for each floodplain are on the council's Floodplain management page.
How do I find the zoning of a Port Macquarie property?
Use the free NSW Planning Portal Spatial Viewer, which the council points to for zoning. Search the address, select the property and read the zone under the Port Macquarie-Hastings LEP 2011.
How high does a new floor have to be in Port Macquarie-Hastings?
A new habitable floor has to sit at the 1% AEP flood level plus a climate change allowance plus 500 mm of freeboard. The council describes the climate change allowance as 900 mm of sea level rise by 2100 plus a 10 per cent increase in rainfall intensity.
Is the Hastings River flood map changing?
An updated draft Hastings River Flood Study is on exhibition until 7 December 2026. The council says most mapping is unchanged, but revised PMF modelling identifies some additional properties as potentially flood prone.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.
Related articles
Central Coast flood map and zoning: how to check a property
Central Coast flood map guide: use the council's online mapping tool to check a property's zone, 1 in 100 year flood, flood precincts and lake levels, and get a flood certificate.
17 November 2026Newcastle flood map and zoning: how to check a property
Newcastle flood map guide: use City of Newcastle's flood information viewer and the Spatial Viewer to check a property's flood extent, zone, heritage and mine subsidence.
17 November 2026Tweed flood map and zoning: how to check a property
Tweed flood map guide: use Tweed Shire Council's online maps to check a property's flood planning level, zone and bushfire mapping, and what the flood certificate costs.