Gympie interactive mapping: zones, overlays and flood levels

Gympie interactive mapping is Gympie Regional Council's free online map, at maps.gympie.qld.gov.au. It shows property and land information, town planning zones and overlays, council facilities and aerial images. To check a property, find it on the map, open the Town Planning theme, and read the zone and the overlays that cover the lot. For flood, the council points to one layer in particular, called "Building Regulations 2021 Flood Resolutions", which carries the flood levels used for new building work.

LayeredGeo is not part of Gympie Regional Council or the Queensland Government. The council's map is a free council tool and the right place to start for a property in Gympie, Southside, Tin Can Bay, Rainbow Beach or anywhere else in the region. LayeredGeo's Property Report is a separate $9 PDF that puts the zone and the flood, bushfire and heritage overlays for one address in one document, with a plain-English note for each.

Which planning scheme applies

The scheme in force is the Gympie Regional Council Planning Scheme 2013, which commenced on 1 July 2013. The current version is Version 4, which took effect on 1 October 2024.

A new scheme is on public exhibition as this is written. The council endorsed the new Gympie Planning Scheme for exhibition on 4 November 2026, consultation runs from Friday 13 November 2026 to Friday 26 February 2027, and the council lists adoption as late 2027. The online map already has a theme called "New Gympie Planning Scheme Maps", so you can see what is proposed for a lot beside what applies now. The 2013 scheme decides what applies until the new one is adopted. If the zone or an overlay on a property you are buying is proposed to change, the exhibition period is when you can make a submission.

How to find a property

  1. Open maps.gympie.qld.gov.au. The council notes that a pop-up blocker may limit some of the map's functions, so allow pop-ups for the site if something does not open.
  2. Find the property by searching, or by zooming the map to the land, and select it.
  3. Choose a theme from the panel at the upper left. The themes are New Gympie Planning Scheme Maps, Community Facilities, Property information, Town Planning and Underground Infrastructure.
  4. In Town Planning, read the zone first, then turn the overlays on one at a time to see where each sits on the lot. Check the neighbouring lots as well.
  5. For flood levels, turn on the "Building Regulations 2021 Flood Resolutions" layer. It holds "New defined flood event" and, for the Cooloola Coast only, "Habitable floor level".

The council does not publish a step-by-step guide to the map, so follow the on-screen prompts where the layout differs from the above. It also offers PDF maps of the region and of Gympie city on its Online Maps page.

What the map shows

Zones. The residential zones in the 2013 scheme are Residential Living, Residential Choice, Character Residential, Tourist Accommodation, Rural Residential and Township. Others a buyer may meet include Rural, the centre zones, the industry zones, Environmental Management and Conservation, and Limited Development (Constrained Land). The zone tells you what the land can be used for and roughly what can be built.

Overlays. The 2013 scheme has seven overlay maps:

  • Flood Hazard. Covered in the next section.
  • Bushfire Hazard. Affects building requirements on and near bushland.
  • Conservation Significant Areas. Can limit clearing and where a building may sit.
  • Good Quality Agricultural Land. Mostly a rural matter, and relevant to subdividing.
  • Heritage and Neighbourhood Character. Can limit demolition of an older house and change what an extension has to look like. Our guide to checking a heritage listing before you buy explains what a listing can stop you doing.
  • Key Resource Areas. Shows quarry resources and the land around them.
  • Potential and Actual Acid Sulfate Soils. Relevant on low coastal land, where digging can expose soils that turn acidic.

The council also publishes three advisory maps: a Storm Surge Advisory Map, a Stock Route Network Advisory Map and a Mining Tenement Advisory Map. Gympie's scheme is unusual in one respect: it states that there are no overlay codes. The rules that go with an overlay sit in the map itself or in the zone codes, so a mapped overlay sends you to the zone code to see what it changes.

How Gympie maps flood

Flood appears in two places on the map: the Flood Hazard overlay, and the flood level layer used for building.

The council's page on flood information for new building work sets out how the levels work:

Question What the council says
Which flood is used? The defined flood event is the "Future Climate 1% AEP" flood, a flood with a 1 in 100 chance in any year, allowing for a future climate
How current is it? Updated flood data took effect on 1 January 2024
How high must a floor be? Outside the Cooloola Coast, the finished floor level is the defined flood level plus 300 mm
How is the level set for a lot? Per lot, using the highest level within the lot
What about the coast? At Tin Can Bay, Cooloola Cove and Rainbow Beach the level comes from storm tide data and is set for each location, not by the 300 mm rule. Use the "Habitable floor level" layer

The updated data covers the Mary River and a list of creeks and coastal areas, including Amamoor, Widgee, Yabba, Eel, Wide Bay, Kandanga, Tinana and Curra creeks, Cooloola Cove and Tin Can Bay. Land shown as a development constraint in the Flood Hazard overlay is a designated flood hazard area for building work, which is what triggers the floor level rule.

The Mary River has flooded Gympie many times, and the council keeps a flood history page and a live Disaster Dashboard. Our Gympie flood map by suburb page compares the mapped flood share of each suburb in the region.

What it does not tell you

  • One level for a whole lot. Because the level is the highest within the lot, the council warns that it "may not apply across large rural lots, where flood levels can vary". On acreage, the flood level at the house site can differ from the figure for the lot.
  • A flood level is not a flood depth at the house. The layer gives a level for building. How deep water would be at a particular spot depends on the ground height there. Our guide to reading a flood overlay versus actual flood risk explains the difference.
  • It is not a council search. The map is a guide. The council's Property Search ($313.00 in 2026/27) covers flooding, drainage and sewerage rights and includes a plan showing the approximate location of flooding. Planning and development certificates are $375.00 for a Limited and $750.00 for a Standard certificate, with Full certificates from $1,250.00. Check the council's current fees before you order.
  • Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost.
  • Title matters. Easements, covenants and other interests come from the title, not the planning map.
  • Development next door. Development applications are searched separately, in the council's Development Application Online tool, which shows the applications lodged over a property and their documents.

Putting the planning layers in one PDF

The council's map is the official source, so start there. If you are comparing several properties, or want the planning layers plus other site data together, LayeredGeo's Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays for an address into a single PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains the utilities publish. The map preview is free and the PDF is $9. Pop in your address or check out a sample report.

If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.

Common questions

What is Gympie interactive mapping? It is Gympie Regional Council's free online map at maps.gympie.qld.gov.au. It shows property information, town planning zones and overlays, council facilities, underground infrastructure and aerial images for the Gympie region.

How do I find the flood level for a Gympie property? Open the council's online map, find the property and turn on the "Building Regulations 2021 Flood Resolutions" layer. The level is set per lot from the Future Climate 1% AEP flood, using flood data that took effect on 1 January 2024.

How high does a floor have to be above the flood level in Gympie? Outside the Cooloola Coast, the council sets the finished floor level for new building work at the defined flood level plus 300 mm. The defined flood level for a lot is the highest level within that lot. At Tin Can Bay, Cooloola Cove and Rainbow Beach the habitable floor level is based on storm tide data and set for each location, so use the "Habitable floor level" layer instead.

Is Gympie getting a new planning scheme? Yes. The new Gympie Planning Scheme is on public consultation from 13 November 2026 to 26 February 2027, and the council lists adoption as late 2027. The Gympie Regional Council Planning Scheme 2013, Version 4, applies until then.

LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.

Common questions

What is Gympie interactive mapping?

It is Gympie Regional Council's free online map at maps.gympie.qld.gov.au. It shows property information, town planning zones and overlays, council facilities, underground infrastructure and aerial images for the Gympie region.

How do I find the flood level for a Gympie property?

Open the council's online map, find the property and turn on the "Building Regulations 2021 Flood Resolutions" layer. It holds "New defined flood event" and, on the Cooloola Coast only, "Habitable floor level". The level is set per lot from the Future Climate 1% AEP flood, using flood data that took effect on 1 January 2024.

How high does a floor have to be above the flood level in Gympie?

Outside the Cooloola Coast, the council sets the finished floor level for new building work at the defined flood level plus 300 mm. The defined flood level for a lot is the highest level within that lot. At Tin Can Bay, Cooloola Cove and Rainbow Beach the habitable floor level is based on storm tide data and set for each location, so use the "Habitable floor level" layer instead.

Is Gympie getting a new planning scheme?

Yes. The new Gympie Planning Scheme is on public consultation from 13 November 2026 to 26 February 2027, and the council lists adoption as late 2027. The Gympie Regional Council Planning Scheme 2013, Version 4, applies until then.

LayeredGeo Property Reports

Check this for any address

Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.

Get a Property Report - $9 → How it works

About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.

← All articles