Townsville flood map and TownsvilleMAPS: how to check a property
The Townsville flood map is part of TownsvilleMAPS, Townsville City Council's free online mapping, reached from the council's TownsvilleMAPS Mapping Service page. TownsvilleMAPS has separate services for different jobs: Flooding for flood extents and flood levels, Townsville City Plan for the zone and overlays, and Community for general property information. To check a property, accept the terms of use, launch the service you need, find the address and read what applies to the lot. The council also says it now has newer and more accurate flood information on its Flood Information Portal.
Try it on your own address - free map of every overlay, then a $9 Property Report.
LayeredGeo is not part of Townsville City Council or the Queensland Government. TownsvilleMAPS is a free council tool and the right place to start for a Townsville property. LayeredGeo's Property Report is a separate $9 PDF that puts the zone and the flood, bushfire and heritage overlays for one address in one document, with a plain-English note for each.
Which TownsvilleMAPS service to open
| Service | What the council says it is for |
|---|---|
| Flooding | Assess the risk of flood in an area, examine flood extents, and determine flood levels for building and development works |
| Townsville City Plan | Find the zoning of a property and the overlays that apply, and view the Priority Infrastructure Area and Priority Development Area |
| Community | Properties, asset infrastructure, contours, traffic models and historical aerial photography |
| LGIP | Existing and planned trunk infrastructure under the Local Government Infrastructure Plan |
The Community service does not show who owns a property. The council offers a separate, free ownership search for that.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
How to find a property
- Open the council's TownsvilleMAPS Mapping Service page and read the Terms and Conditions of Use.
- Under the service you want, choose "Accept and Launch". The map opens in a new tab. Viewing does not need an account.
- Find the property and select it.
- In the Townsville City Plan service, read the zone first, then the overlays. In the Flooding service, look at the flood extent over the lot and the flood level.
The council publishes a TownsvilleMAPS User Guide as a PDF on the same page, and says user manuals are also in the help group on the map's standard tools tab. For the Flooding service there are two sets of explanatory notes on the Flood Mapping Service page: Part 1 covers the flood maps, their limitations and what they do not show, and Part 2 covers searching for properties and finding flood heights and depths. Part 1 is worth reading before you rely on a flood line.
Which planning scheme applies
The scheme is the Townsville City Plan, which commenced on 27 October 2014. The current version is Version 2025/01, adopted by the council on 15 October 2025 and in effect from 8 December 2025. That was a major amendment: it added a new overlay called Major infrastructure and hazardous facilities, revised the Airport environs overlay, updated the Bushfire hazard overlay, renamed zones to match the state's standard names and updated the zoning maps. If you looked up a property before December 2025, look again.
The City Plan service is a digital copy of the scheme's maps. The council's wording on its infrastructure mapping is that where there is an inconsistency, the planning scheme prevails, and the same care applies to any online map: the adopted scheme is the authority.
What the City Plan map shows
Zones. The residential zones are Low density residential, Medium density residential, High density residential, Character residential and Rural residential. Others a buyer may meet include Mixed use, Emerging community, Rural, and Environmental management and conservation. The zone tells you what the land can be used for and roughly what can be built.
Overlays. Overlays are mapped areas where extra planning rules apply. The City Plan's overlay maps are:
- Flood hazard. Covered in the next section.
- Coastal hazard areas. Two kinds: storm tide inundation areas and erosion prone areas. Storm tide is flooding from the sea during a cyclone, and is mapped separately from river and creek flooding. Our guide to Queensland storm tide maps explains how to read them.
- Bushfire hazard. Affects building requirements on and near bushland.
- Landslide hazard. Flags steeper land where slope stability and earthworks need extra care.
- Cultural heritage. Our guide to checking a heritage listing before you buy explains what a listing can stop you doing.
- Airport environs. Several maps, including operational airspace, aircraft noise contours and lighting buffer zones.
- Noise corridors. Roads and railway.
- Environmental importance and water resource catchments. These can limit clearing and where a building may sit.
- Extractive resources and mining, and regional infrastructure.
How Townsville maps flood hazard
The City Plan's flood hazard policy sorts flood-affected land into four ratings:
- High flood hazard and medium flood hazard. Both are based on the 1% AEP flood, a flood with a 1 in 100 chance of happening in any year. That flood is the scheme's defined flood event. The split between high and medium depends on how deep and how fast the water is modelled to be.
- Low flood hazard. Land outside the high and medium areas that would be reached by the probable maximum flood, the largest flood that could conceivably happen.
- Medium flood hazard, further investigation. Land outside the areas the council's flood studies cover. It was mapped from interim Queensland Reconstruction Authority mapping, amended by the council, and the policy calls it "less reliable" because there is no depth, level or velocity information behind it.
That last rating matters when you read the map. A lot shown as "further investigation" has not been modelled in detail. The rating does not mean the risk is moderate; it means the risk has not been measured.
This overlay rests on the council's older flood studies, which run from 2005 to 2018 and include the 2013 Ross River Flood Study. The council says those studies "still inform the current hazard overlay mapping in the Townsville City Plan" and stay available until the overlay maps are updated.
The newer maps in the Flood Information Portal
The council has since built new flood models for twelve major catchments, including Ross River and Stuart Creek, the Bohle River, the Black River and the Magnetic Island bays. The models were peer reviewed by an independent third party. Maps made from them are in the Flood Information Portal, which opens after you accept its terms and conditions. The portal lets you compare the existing flood maps with the new ones for a location. It holds two kinds of map:
Flood depth mapping. Compiled and validated in 2025, it shows the modelled water depth in a 1% AEP flood. The council is direct about what that is: "These are not maps of any 'actual' historical flooding event". They are a model of one size of flood. The new depth maps include a future climate forecast, allowing for more intense rainfall and for sea level rise in coastal areas, which the older maps did not.
Flood risk mapping. A newer approach that looks at 10 different sizes of flood and six levels of hazard, from shallow, slow water to deep, fast water. Each location gets one rating:
| Rating | What the council calls it |
|---|---|
| FR1 | Very Low Risk |
| FR2 | Low Risk |
| FR3 | Medium Risk |
| FR4 | High Risk |
| FR5 | Very High Risk |
The council says FR4 and FR5 areas generally see flooding that is both more severe and more frequent, while FR1 and FR2 areas tend to see rarer and less severe flooding.
The part that matters for a buyer is which map counts today. The high, medium and low hazard overlay in the City Plan is the one planning decisions use now. The risk mapping is not yet in force: the council says that once it has consulted on proposed flood-related amendments, the risk mapping "will form the basis of Planning decisions using our amended Townsville City Plan". So look at both. The overlay tells you the rules that apply to a lot now, and the portal shows what the newer modelling says and where the rules may head. For land outside the study areas, the council notes it has less detailed information, and that the Queensland Reconstruction Authority's mapping of those areas is also shown in the portal.
Our Townsville flood map by suburb page compares the mapped flood share of each suburb in the city.
What it does not tell you
- It is not a council search. The maps are a guide, and the portal's own terms call its flood mapping "a source of general information only". The council's Property Searches page lists the formal reports, some free and some paid, including a standard property search report, a building and planning records search, and planning and development certificates. The certificates come in three levels: limited (5 business days), standard (10 business days) and full (30 business days). The council notes you may need more than one report to be fully informed about a property. Check the current fees before you order.
- A model is not a record of past floods. The depth maps show a modelled 1% AEP flood. They do not show where water reached in any particular flood, and a real flood can be larger or smaller than the one modelled.
- A hazard rating is not a depth at the house. The rating describes the land. Whether water enters a building depends on the ground level at the house and its floor height. Our guide to reading a flood overlay versus actual flood risk explains the difference.
- River flood and storm tide are two maps. A property can be clear of one and inside the other, so look at both.
- Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost.
- Title matters. Easements, covenants and other interests come from the title, not the planning map.
- Development next door. Development applications are searched separately, in the council's ePlanning application search, by application number or street address. Applications lodged before 1 July 2008 are not online.
Putting the planning layers in one PDF
The council's maps are the official source, so start there. If you are comparing several properties, or want the planning layers plus other site data together, LayeredGeo's Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays for an address into a single PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains the utilities publish. The map preview is free and the PDF is $9. Pop in your address or check out a sample report.
If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.
Common questions
Where is the Townsville flood map? It is the Flooding service in TownsvilleMAPS, launched from the Flood Mapping Service page on the Townsville City Council website after you accept the terms of use. The council also has a Flood Information Portal, which it says holds newer and more accurate flood information.
What is TownsvilleMAPS? TownsvilleMAPS is Townsville City Council's free online mapping. It has separate services for Community information, Flooding, the Townsville City Plan and the Local Government Infrastructure Plan.
What flood is the Townsville flood hazard overlay based on? The defined flood event in the Townsville City Plan is the 1% AEP flood, a flood with a 1 in 100 chance in any year. High and medium flood hazard areas are based on it. Low flood hazard areas extend to the probable maximum flood.
Does the Townsville flood map show past floods? No. The council says its flood depth maps are not maps of any actual historical flooding event. They show the modelled water depth in a 1% AEP flood, and the newest maps, compiled in 2025, include a future climate forecast.
What do FR1 to FR5 mean on the Townsville flood risk map? They are the council's flood risk ratings, from FR1 Very Low Risk to FR5 Very High Risk, based on 10 sizes of flood and six levels of hazard. The council says this risk mapping will form the basis of planning decisions once the Townsville City Plan is amended. Until then the current flood hazard overlay applies.
LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.
Common questions
Where is the Townsville flood map?
It is the Flooding service in TownsvilleMAPS, launched from the Flood Mapping Service page on the Townsville City Council website after you accept the terms of use. The council also has a Flood Information Portal, which it says holds newer and more accurate flood information.
What is TownsvilleMAPS?
TownsvilleMAPS is Townsville City Council's free online mapping. It has separate services for Community information, Flooding, the Townsville City Plan and the Local Government Infrastructure Plan.
What flood is the Townsville flood hazard overlay based on?
The defined flood event in the Townsville City Plan is the 1% AEP flood, a flood with a 1 in 100 chance in any year. High and medium flood hazard areas are based on it. Low flood hazard areas extend to the probable maximum flood.
Does the Townsville flood map show past floods?
No. The council says its flood depth maps are not maps of any actual historical flooding event. They show the modelled water depth in a 1% AEP flood, and the newest maps, compiled in 2025, include a future climate forecast.
What do FR1 to FR5 mean on the Townsville flood risk map?
They are the council's flood risk ratings, from FR1 Very Low Risk to FR5 Very High Risk, based on 10 sizes of flood and six levels of hazard. The council says this risk mapping will form the basis of planning decisions once the Townsville City Plan is amended. Until then the current flood hazard overlay applies.
LayeredGeo Property Reports
Check this for any address
Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.
About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.
Related articles
Old aerial photos of your property: QImagery, NSW and national archives
Find free historical aerial photos of an Australian property back to the 1930s: QImagery in Queensland, the NSW Historical Imagery Viewer and the Commonwealth archive.
16 November 2026Mackay interactive mapping (MiMAPS): zones and flood maps
Mackay interactive mapping guide: use MiMAPS to check a property's zone, overlays, flood and storm tide mapping, and the council's Property Flood Report.
16 November 2026Gympie interactive mapping: zones, overlays and flood levels
Gympie interactive mapping guide: find a property's zone, overlays and flood level on the council's online map, and what the new planning scheme changes.