Mackay interactive mapping (MiMAPS): zones and flood maps

Mackay interactive mapping is called MiMAPS. It is Mackay Regional Council's free online map, at mimaps.mackay.qld.gov.au, and the council says anyone can use it to view the region's mapping information. It covers land and property, planning and land use, services and infrastructure, community facilities and coastal hazards. To check a property, accept the conditions of use, find the property, and read the zone and the overlays that apply. For flood, the council has a second tool alongside the map, the Property Flood Report, which gives estimated flood levels and minimum floor levels for a property.

LayeredGeo is not part of Mackay Regional Council or the Queensland Government. MiMAPS is a free council tool and the right place to start for a property in Mackay, Sarina, Walkerston, Marian or the northern beaches. LayeredGeo's Property Report is a separate $9 PDF that puts the zone and the flood, bushfire and heritage overlays for one address in one document, with a plain-English note for each.

Which planning scheme applies

The scheme is the Mackay Region Planning Scheme 2017. The current version is Version 5.0, which the council adopted on 1 June 2026 and which commenced on 15 June 2026.

The council has finished a 10-year review of the scheme and decided to amend it over time and not replace it, so there is no new planning scheme on the way. Changes will come as amendment packages. Flood mapping is one area that does change between versions, because the council updates the overlay as new flood studies are finished.

How to find a property

  1. Open mimaps.mackay.qld.gov.au. You do not need an account, but you must accept the Conditions of Use before the map opens. The site can take around half a minute to load.
  2. Find the property on the map and select it.
  3. Read the zone first, then turn on the overlays to see where each one sits on the lot. Check the neighbouring lots as well.
  4. Open the coastal hazards layers if the property is near the coast or on low ground.

The help guide is inside the map, on the third tab at the top left, labelled "Flood Gauge Mapping, Help and MiMAPS Contact". It has step-by-step instructions. MiMAPS also offers a Planning Report for a property, which the site notes has had intermittent problems, so do not rely on it loading every time.

What the map shows

Zones. The residential zones are Low density residential, Medium density residential, High density residential and Emerging community. Around them sit the Rural, Rural residential and Conservation zones, plus Township, Mixed use, Community facilities and the commercial and industrial zones. The zone tells you what the land can be used for and roughly what can be built. The council publishes a "Know Your Land Use Zones" page that explains each one.

Overlays. Overlays are mapped areas where extra planning rules apply. The scheme's overlay maps are:

  • Flood and coastal hazards. Covered in the next section. There is also a separate Flood risk (Finch Hatton) overlay.
  • Bushfire hazard. Affects building requirements on and near bushland.
  • Landslide hazard. Flags steeper land where slope stability and earthworks need extra care.
  • Acid sulfate soils. Relevant on low coastal land, where digging can expose soils that turn acidic.
  • Heritage and neighbourhood character. Can limit demolition of an older house and change what an extension has to look like. Our guide to checking a heritage listing before you buy explains what a listing can stop you doing.
  • Biodiversity. Covers environmentally significant vegetation, wildlife habitat, waterways and wetlands, and can limit clearing.
  • Agricultural land. Mostly a rural matter, and relevant to subdividing cane land.
  • Airport environs and Transport Noise Corridors. Show where aircraft or road and rail noise affects what can be built.
  • Extractive resources and high impact activities, Regional infrastructure, Landscape character and image corridor, and Road hierarchy.

How Mackay maps flood and storm tide

Mackay has two water hazards, and both sit in the Flood and coastal hazards overlay: flooding from rivers, creeks and local drainage, and storm tide from the sea during a cyclone.

A few things about the overlay are worth knowing before you read it:

Question What the council says
How rare a flood does it cover? It considers events with a 0.2 per cent chance in any year, about 1 in 500, so a property inside it may never have flooded
Does it cover the whole region? No. The council says it is not feasible to complete flood studies everywhere at once, so the mapping is added to as studies are finished
Does being outside it mean no flood risk? No. The council says being outside the overlay does not guarantee a property will not flood in the future
How current is it? Each study is a snapshot and may not reflect recent earthworks

The mapping is built from the council's flood studies, which it lists on its Flood Studies page. They include the Pioneer River Flood Study (2011, updated 2021), the Bakers Creek through Walkerston Flood Study (updated 2021), the Mackay City Flood Study (adopted 2021), the Goosepond Creek studies (2012), the McCreadys Creek assessment (2023), the Sandy Creek and Rocky Dam Creek studies (adopted 2020) and the Finch Hatton Flood Study (adopted 2024). Storm tide comes from the Mackay Region Storm Tide Study, whose final report is dated June 2013.

The Goosepond Creek catchment is the one many locals remember. The council records an extreme flood there on 15 February 2008, which its 2012 study found was about a 1-in-500 year event.

For the coast, MiMAPS has coastal hazard layers from the Mackay Coast Our Future Study showing present-day tidal inundation, storm tide inundation and erosion prone areas, with predicted hazards for the year 2100. Our guide to Queensland storm tide maps explains how to read storm tide mapping.

The Property Flood Report

This is the council tool that turns the mapping into numbers for one property. The council's Property Flood Report page says the report gives minimum floor level requirements, estimated design flood levels and the source of flooding, and covers current and projected future flood risks. It is reached from that page on the council website.

The council sets two limits on it. It does not provide property-based historical flood information, and it cannot predict future flooding. The report tells you the modelled levels a new building has to respect. It does not tell you whether a particular house has been flooded before.

For emergencies, the council also publishes storm surge and Pioneer River evacuation zone maps, runs flood cameras at seven creek and road crossings, and has an Emergency Dashboard. Our Mackay flood map by suburb page compares the mapped flood share of each suburb in the region.

What it does not tell you

  • It is not a council certificate. The council's conditions describe MiMAPS as general information only, to be verified before you rely on it. For a formal answer the council sells planning and development certificates in three levels, Limited, Standard and Full, each including the one before. Fees and processing times are on the council's property search application.
  • A flood level is not a flood depth at the house. A design flood level describes the land. Whether water enters a building depends on the ground level at the house and its floor height. Our guide to reading a flood overlay versus actual flood risk explains the difference.
  • River flood and storm tide are different risks. A property can be clear of one and inside the other, so look at both.
  • Ground conditions. Soil reactivity, geology, fill and groundwater are not planning layers, yet they drive footing design and slab cost.
  • Title matters. Easements, covenants and other interests come from the title, not the planning map.
  • Development next door. Development applications are searched separately, in the council's eApplication Tracker. It shows key milestones only, and the council says not to rely on it for a purchasing decision.

Putting the planning layers in one PDF

The council's map is the official source, so start there. If you are comparing several properties, or want the planning layers plus other site data together, LayeredGeo's Property Report puts zoning, flood, bushfire, heritage, vegetation and environmental overlays for an address into a single PDF, with a map and a plain-English note for each, alongside contours, registered easements and the water, sewer and stormwater mains the utilities publish. The map preview is free and the PDF is $9. Pop in your address or check out a sample report.

If you are building, a separate geotechnical desktop study covers the geology, soils, indicative soil reactivity range and groundwater for the address. It does not replace a site investigation, which is what decides the site classification.

Common questions

What is Mackay interactive mapping called? It is called MiMAPS. It is Mackay Regional Council's free online map at mimaps.mackay.qld.gov.au, covering land and property, planning and land use, services and infrastructure, community facilities and coastal hazards. You accept the conditions of use and do not need an account.

How do I check if a Mackay property is in a flood area? Look at the Flood and coastal hazards overlay in MiMAPS, then use the council's Property Flood Report for the estimated design flood levels and minimum floor level for the property. Check the coastal hazard layers as well if the land is low or near the coast.

Does the Mackay flood overlay mean a property has flooded? No. The council says the overlay considers events with a 0.2 per cent chance in any year, so a property in it may never have flooded. It also says being outside the overlay does not guarantee a property will not flood.

How do I find the zoning of a Mackay property? Zoning information is free through MiMAPS. Find the property on the map and read the zone under the Mackay Region Planning Scheme 2017, Version 5.0, which commenced on 15 June 2026.

LayeredGeo's Property Report pulls together public planning and site data for property due diligence across Queensland, New South Wales, Victoria, South Australia, the ACT and Tasmania, so you can understand a place before you commit.

Common questions

What is Mackay interactive mapping called?

It is called MiMAPS. It is Mackay Regional Council's free online map at mimaps.mackay.qld.gov.au, covering land and property, planning and land use, services and infrastructure, community facilities and coastal hazards. You accept the conditions of use and do not need an account.

How do I check if a Mackay property is in a flood area?

Look at the Flood and coastal hazards overlay in MiMAPS, then use the council's Property Flood Report for the estimated design flood levels and minimum floor level for the property. Check the coastal hazard layers as well if the land is low or near the coast.

Does the Mackay flood overlay mean a property has flooded?

No. The council says the overlay considers events with a 0.2 per cent chance in any year, so a property in it may never have flooded. It also says being outside the overlay does not guarantee a property will not flood.

How do I find the zoning of a Mackay property?

Zoning information is free through MiMAPS. Find the property on the map and read the zone under the Mackay Region Planning Scheme 2017, Version 5.0, which commenced on 15 June 2026.

LayeredGeo Property Reports

Check this for any address

Zoning, flood, bushfire and every other planning overlay that applies to a lot - mapped and explained in a $9 report. No account needed.

Get a Property Report - $9 → How it works

About this article. Published by LayeredGeo and written from the published research cited in the Sources section above. It is general information about how property and ground conditions are assessed in Australia, not engineering, planning, legal or financial advice, and it is not specific to any property. Check anything that matters against the source dataset or a suitably qualified professional before you rely on it. If you spot something wrong, tell us at hello@layeredgeo.com.au and we will fix it.

← All articles